There is no dearth of books on telescope optics and, indeed, optics is clearly a keyelementinthedesignandconstructionoftelescopes.Butitisbynomeans the only important element. As telescopes become larger and more costly, other aspects such as structures, pointing, wavefront control, enclosures, and project management become just as critical. Although most of the technical knowledge required for all these ?elds is available in various specialized books, journal articles, and technical reports, they are not necessarily written with application to telescopes in mind. This bookisa?rstattemptatassemblinginasingletextthebasicastronomicaland engineering principles used in the design and construction of large telescopes. Itsaimistobroadlycoverallmajoraspectsofthe?eld,fromthefundamentals ofastronomicalobservationto optics, controlsystems,structural,mechanical, andthermalengineering,aswellasspecializedtopicssuchassiteselectionand program management. This subject is so vast that an in-depth treatment is obviously imprac- cal. Our intent is therefore only to provide a comprehensive introduction to the essential aspects of telescope design and construction. This book will not replace specialized scienti?c and technical texts. But we hope that it will be useful for astronomers, managers, and systems engineers who seek a basic understanding of the underlying principles of telescope making, and for s- cialists who wish to acquaint themselves with the fundamental requirements and approaches of their colleagues in other disciplines.

There is no dearth of books on telescope optics and, indeed, optics is clearly a keyelementinthedesignandconstructionoftelescopes.Butitisbynomeans the only important element. As telescopes become larger and more costly, other aspects such as structures, pointing, wavefront control, enclosures, and project management become just as critical. Although most of the technical knowledge required for all these ?elds is available in various specialized books, journal articles, and technical reports, they are not necessarily written with application to telescopes in mind. This bookisa?rstattemptatassemblinginasingletextthebasicastronomicaland engineering principles used in the design and construction of large telescopes. Itsaimistobroadlycoverallmajoraspectsofthe?eld,fromthefundamentals ofastronomicalobservationto optics, controlsystems,structural,mechanical, andthermalengineering,aswellasspecializedtopicssuchassiteselectionand program management. This subject is so vast that an in-depth treatment is obviously imprac- cal. Our intent is therefore only to provide a comprehensive introduction to the essential aspects of telescope design and construction. This book will not replace specialized scienti?c and technical texts. But we hope that it will be useful for astronomers, managers, and systems engineers who seek a basic understanding of the underlying principles of telescope making, and for s- cialists who wish to acquaint themselves with the fundamental requirements and approaches of their colleagues in other disciplines.

Ground- or space-based telescopes are becoming increasingly more complex and construction budgets are typically in the billion dollar range. Facing costs of this magnitude, availability of engineering tools for prediction of performance and design optimization is imperative. Establishment of simulation models combining different technical disciplines such as Structural Dynamics, Control Engineering, Optics and Thermal Engineering is indispensable. Such models are normally called Integrated Models because they involve many different disciplines. The models will play an increasingly larger role for design of future interdisciplinary optical systems in space or on ground. The book concentrates on integrated modeling of optical and radio telescopes but the techniques presented will be applicable to a large variety of systems. Hence, the book will be of interest to optical and radio telescope designers, designers of spacecrafts that include optical systems, and to designers of various complex defense systems. The book may also find use as a textbook for undergraduate and graduate courses within the field. "Adaptive Optics" is an exciting and relatively new field, originally dedicated to correction for blurring when imaging through the atmosphere. Although this objective is still of high importance, the concept of Adaptive Optics has recently evolved further. Today, the objective is not only to correct for atmospheric turbulence effects but also for a range of static and dynamical telescope aberrations. The notion of adaptive optics has expanded to the field of "Wavefront Control", correcting for a variety of system aberrations. Wavefront control systems maintain form and position of optical elements with high precision under static and dynamical load. In many ways, such systems replace the steel structures of traditional optical systems, thereby providing much lighter systems with a performance not possible before. Integrated Modeling is the foremost tool for studies of Wavefront Control for telescopes and complex optics and is therefore now of high importance. Springer has recently published two books on telescopes, "Reflecting Telescope Optics" by R. Wilson, and "The Design and Construction of Large Optical Telescopes" by P. Bely. Noting that a new (and expensive) generation of Extremely Large Telescopes with apertures in the 30-100 m range is on the way, the present book on integrated modeling is a good match to the existing books and an appropriate specialization and continuation of some subjects dealt with in those books.

This book demonstrates how progress in radio astronomy is intimately linked to the development of reflector antennas of increasing size and precision. The authors describe the design and construction of major radio telescopes as those in Dwingeloo, Jodrell Bank, Parkes, Effelsberg and Green Bank since 1950 up to the present as well as millimeter wavelength telescopes as the 30m MRT of IRAM in Spain, the 50m LMT in Mexico and the ALMA submillimeter instrument. The advances in methods of structural design and coping with environmental influences (wind, temperature, gravity) as well as application of new materials are explained in a non-mathematical, descriptive and graphical way along with the story of the telescopes. Emphasis is placed on the interplay between astronomical and electromagnetic requirements and structural, mechanical and control solutions. A chapter on management aspects of large telescope projects closes the book. The authors address a readership with interest in the progress of engineering solutions applied to the development of radio telescope reflectors and ground station antennas for satellite communication and space research. The book will also be of interest to historians of science and engineering with an inclination to astronomy.

Design optics and technology for large spaceborne astronomical telescopes.

Every night, astronomers use a new generation of giant telescopes at observatories around the world to study phenomena at the forefront of science. By focusing on the history of the Gemini ObservatoryÑtwin 8-meter telescopes located on mountain peaks in Hawaii and ChileÑGiant Telescopes tells the story behind the planning and construction of modern scientific tools, offering a detailed view of the technological and political transformation of astronomy in the postwar era. Drawing on interviews with participants and archival documents, W. Patrick McCray describes the ambitions and machinations of prominent astronomers, engineers, funding patrons, and politicians in their effort to construct a modern facility for cutting-edge scienceÑand to establish a model for international cooperation in the coming era of Òmegascience.Ó His account details the technological, institutional, cultural, and financial challenges that scientists faced while planning and building a new generation of giant telescopes. Besides exploring how and why scientists embraced the promise and potential of new technologies, he considers how these new tools affected what it means to be an astronomer. McCrayÕs book should interest anyone who desires a deeper understanding of the science, technology, and politics behind finding our place in the universe.

Interest world-wide in the provision of new observational astro nomical facilities in the form of ground-based optical telescopes of large aperture has never been higher than exists at present. The benefits to be gained from increased aperture size, however, are only utilised effectively if efficient instrumentation is also available. There have been significant improvements recently in this area, part icularly in detector technology and data handling as well as in optical design, so that systems which are currently being developed have the capability of being vastly more powerful in terms of the efficient use of photons than those which existed only 5 years ago. The rationale for the decision by Commission 9 of the International Astronomical Union to hold IAU Colloquium 67, therefore, was to obtain reports on these developments with the emphasis placed upon overall efficiency of the complete observational system - from telescope aperture right through to detector output. A fitting venue for the meeting was the site of the 6 metre BTA (Bolshoi Azimuth Telescope) at Zelenchukskaya in the Caucasus mount ains, USSR. The BTA is operated by the Special Astrophysical Observatory located at Nizhnij Arkhyz, a few kilometres from the telescope itself.