The LA-series small-block Chrysler engine is a powerful, efficient, and quick-revving engine that has dutifully powered millions of Chrysler/Dodge/Plymouth cars and trucks from 1964 to 2003. And it's also a power unit for many renowned Mopar muscle cars, including the Charger, Barracuda, Challenger, Dart, and others. The LA designates the small-block as "Lightweight A," which was a huge improvement over the previous Ageneration engine. With its compact size, 50-pound weight savings, thin-wall casting, and polyspherical heads, it cranked out a lot of torque and horsepower, which made it ideally suited for the street and a formidable opponent on the track. Although this venerable small-block has delivered impressive performance in stock trim, it can be easily modified to produce much greater power for almost any application. The LA was offered in 273-, 318-, 340- and 360-ci iterations, and a full range of aftermarket products are offered for these engines. Mopar engine expert and author Larry Shepard identifies the best parts and clearly guides you through the specific techniques to extract maximum performance from this platform. In particular, he delves into the heads, cams, and valvetrain products and modifications that will achieve your horsepower goals. In addition, he provides in-depth build-up instruction for other essential components: blocks, cranks, pistons, rods, ignition systems, intakes, carburetors, and exhaust. If you own an LA small-block–powered Mopar car or truck, this invaluable guidance and instruction will allow you to optimize performance and maintain reliability. Whether you're building an engine for street, street/strip, or racing, this vital information saves you save time, money, and delivers results. Add this to your Mopar library today!

The Ford FE (Ford Edsel) engine is one of the most popular engines Ford ever produced, and it powered most Ford and Mercury cars and trucks from the late 1950s to the mid-1970s. For many of the later years, FE engines were used primarily in truck applications. However, the FE engine is experiencing a renaissance; it is now popular in high-performance street, strip, muscle cars, and even high-performance trucks. While high-performance build-up principles and techniques are discussed for all engines, author Barry Rabotnick focuses on the max-performance build-up for the most popular engines: the 390 and 428. With the high-performance revival for FE engines, a variety of builds are being performed from stock blocks with mild head and cam work to complete aftermarket engines with aluminum blocks, high-flow heads, and aggressive roller cams. How to Build Max-Performance Ford FE Engines shows you how to select the ideal pistons, connecting rods, and crankshafts to achieve horsepower requirements for all applications. The chapter on blocks discusses the strengths and weaknesses of each particular block considered. The book also examines head, valvetrain, and cam options that are best suited for individual performance goals. Also covered are the best-flowing heads, rocker-arm options, lifters, and pushrods. In addition, this volume covers port sizing, cam lift, and the best rocker-arm geometry. The FE engines are an excellent platform for stroking, and this book provides an insightful, easy-to-follow approach for selecting the right crank, connecting rods, pistons, and making the necessary block modifications. This is the book that Ford FE fans have been looking for.

This revved up volume addresses high-performance engines, such as the ones found in Mustangs and emphasizes a budget approach to building them. 300 photos.

Ford's 351 Cleveland was designed to be a "mid-sized" V-8 engine, and was developed for higher performance use upon its launch in late 1969 for the 1970 models. The Cleveland engine addressed the major shortcoming of the Windsor engines that preceded it, namely cylinder head air flow. The Windsor engines just couldn't be built at the time to compete effectively with the strongest GM and Mopar small-block offerings, and the Cleveland engine was the answer to that problem. Unfortunately, the Cleveland engine was introduced at the end of Detroit's muscle car era, and the engine, in pure Cleveland form, was very short lived. It did continue on as a low compression passenger car and truck engine in the form of the 351M and 400M, which in their day, offered little in the way of excitement. Renewed enthusiasm in this engine has spawned an influx of top-quality new components that make building or modifying these engines affordable. This new book reviews the history and variations of the 351 Cleveland and Ford's related engines, the 351M and 400M. Basic dimensions and specifications of each engine, along with tips for identifying both design differences and casting numbers are covered. In addition, each engine's strong points and areas of concern are described in detail. Written with high performance in mind, both traditional power tricks and methods to increase efficiency of these specific engines are shared. Also, example builds of 400-, 500-, and even 600-hp engines are highlighted, so you can model your build after any of these powerhouses, depending on your intended use. With the influx of aftermarket parts, especially excellent cylinder heads, the 351 Cleveland as well as the 351M and 400m cousins are now seen as great engines to build. This book will tell you everything you need to know to build a great street or competition engine based in the 351 Cleveland platform.

Learn how to get the most horsepower out of the popular small-block Ford with this all-new full-color guide. The attention of the performance aftermarket has turned to the Coyote platform and swaps, but Ford is a little different than GM and Chrysler in that regard. The sheer size of the Coyote engine is problematic because it is very difficult to fit into any vehicle with shock towers. However, the shock-tower cars are often the most popular cars to modify. As such, the small-block Ford remains a viable option for making a large amount of horsepower in a much more affordable package. In Ford Small-Block Engines: How to Build Max Performance, Ford expert Jim Smart covers all of the major components, including crankshafts, rods and pistons, camshafts, the valvetrain, oiling systems, intakes, carburetors, ignition systems and exhaust systems. Featured are the latest street heads from AFR, Dart, Ford Performance, Edelbrock, and other prominent manufacturers. Aftermarket blocks are also covered extensively from a variety of manufacturers, such as Ford Performance, Dart, Speedmaster, Bill Mitchell Products, and World Products. The basic design of this engine is more than 60 years old, but the aftermarket for this powerplant has grown over the years and is still growing. While the Coyote engine family has earned a strong following, the original Ford small-block engine retains just as strong of a following, with the massive number of these engines still in use throughout the hobby. Whether you want to get started on your build or you just want to learn about the small-block Ford’s capabilities, this book will make a great addition to your library.

In this definitive guide, the author explains the concept of building a stroker, paying special attention to the effect that increasing the bore and stroke have on the engine as a whole.

Renowned engine builder and technical writer David Vizard turns his attention to extracting serious horsepower from small-block Chevy engines while doing it on a budget. Included are details of the desirable factory part numbers, easy do-it-yourself cylinder head modifications, inexpensive but effective aftermarket parts, the best blocks, rotating assembly (cranks, rods, and pistons), camshaft selection, lubrication, induction, ignition, exhaust systems, and more.