IEC 61131-3 gives a comprehensive introduction to the concepts and languages of the new standard used to program industrial control systems. A summary of the special programming requirements and the corresponding features in the IEC 61131-3 standard make it suitable for students as well as PLC experts. The material is presented in an easy-to-understand form using numerous examples, illustrations, and summary tables. There is also a purchaser's guide and a CD-ROM containing two reduced but functional versions of programming systems.

The rapid advances in performance and miniaturisation in microtechnology are constantly opening up new markets for the programmable logic controller (PLC). Specially designed controller hardware or PC-based controllers, extended by hardware and software with real-time capability, now control highly complex automation processes. This has been extended by the new subject of “safe- related controllers”, aimed at preventing injury by machines during the production process. The different types of PLC cover a wide task spectrum - ranging from small network node computers and distributed compact units right up to modular, fau- tolerant, high-performance PLCs. They differ in performance characteristics such as processing speed, networking ability or the selection of I/O modules they support. Throughout this book, the term PLC is used to refer to the technology as a whole, both hardware and software, and not merely to the hardware architecture. The IEC61131 programming languages can be used for programming classical PLCs, embedded controllers, industrial PCs and even standard PCs, if suitable hardware (e.g. fieldbus board) for connecting sensors and actors is available.

This practical book gives a comprehensive introduction to the concepts and languages of the new standard IEC 61131 used to program industrial control systems. A summary of the special requirements in programming industrial automation systems and the corresponding features in the IEC 61131-3 standard makes it suitable for students as well as PLC experts. The material is presented in an easy-to-understand form using numerous examples, illustrations and summary tables. There is also a purchaser's guide and a CD-ROM containing two reduced but functional versions of programming systems. These increase the value of the book for PLC programmers and for those in charge of purchasing software in industrial companies.

This practical book gives a comprehensive introduction to the concepts and languages of the new standard IEC 61131 used to program industrial control systems. A summary of the special requirements in programming industrial automation systems and the corresponding features in the IEC 61131-3 standard makes it suitable for students as well as PLC experts. The material is presented in an easy-to-understand form using numerous examples, illustrations and summary tables. There is also a purchaser's guide and a CD-ROM containing two reduced but functional versions of programming systems. These increase the value of the book for PLC programmers and for those in charge of purchasing software in industrial companies.

This revised edition includes all IEC proposed amendments and corrections for the planned 1999 revision of IEC 1131-3, as agreed by the IEC working group. It accurately describes the languages and concepts, and interprets the standard for practical implementation and applications.

This book gives an introduction to the programming language Structured Text (ST) which is used in Programmable Logic Controllers (PLC). The book can be used for all types of PLC brands including Siemens Structured Control Language (SCL) and Programmable Automation Controllers (PAC). This 3rd edition has been updated and expanded with many of the suggestions and questions that readers and students have come up with, including the desire for many more illustrations and program examples. CONTENTS: - Background, benefits and challenges of ST programming - Syntax, data types, best practice and basic ST programming - IF-THEN-ELSE, CASE, FOR, CTU, TON, STRUCT, ENUM, ARRAY, STRING - Guide for best practice naming, troubleshooting, test and program structure - Sequencer and code split-up into functions and function blocks - FIFO, RND, sorting, scaling, toggle, simulation signals and digital filter - Tank controls, conveyor belts, adaptive pump algorithm and robot control - PLC program structure for pumping stations, 3D car park and car wash - Examples: From Ladder Diagram to ST programming The book contains more than 150 PLC code examples with a focus on learning how to write robust, readable, and structured code. The book systematically describes basic programming, including advice and practical examples based on the author ́s extensive industrial experience. The author is Bachelor of Science in Electrical Engineering (B.Sc.E.E.) and has 25 years ́ experience in specification, development, programming and supplying complex control solutions and supervision systems. The author is Assistant Professor and teaches PLC programming at Dania Academy, a higher education institution in Randers, Denmark.

This book gives an introduction to Structured Text (ST), used in Programmable Logic Control (PLC). The book can be used for all types of PLC brands including Siemens Structured Control Language (SCL) and Programmable Automation Controllers (PAC). Contents: - Background, advantage and challenge when ST programming - Syntax and fundamental ST programming - Widespread guide to reasonable naming of variables - CTU, TOF, TON, CASE, STRUCT, ENUM, ARRAY, STRING - Guide to split-up into program modules and functions - More than 90 PLC code examples in black/white - FIFO, RND, 3D ARRAY and digital filter - Examples: From LADDER to ST programming - Guide to solve programming exercises Many clarifying explanations to the PLC code and focus on the fact that the reader should learn how to write a stable, robust, readable, structured and clear code are also included in the book. Furthermore, the focus is that the reader will be able to write a PLC code, which does not require a specific PLC type and PLC code, which can be reused. The basis of the book is a material which is currently compiled with feedback from lecturers and students attending the AP Education in Automation Engineering at the local Dania Academy, "Erhvervsakademi Dania", Randers, Denmark. The material is thus currently updated so that it answers all the questions which the students typically ask through-out the period of studying. The author is Bachelor of Science in Electrical Engineering (B.Sc.E.E.) and has 25 years of experience within specification, development, programming and supplying complex control solutions and supervision systems. The author is Assistant Professor and teaching PLC control systems at higher educations. LinkedIn: https://www.linkedin.com/in/tommejerantonsen/