Zweiphasenströmungen, insbesondere Wasser/Dampf-Strömungen, sind für die Auslegung und den Betrieb thermohydraulischer Systeme nach wie vor von großem Interesse. Diese Arbeit befasst sich mit der Untersuchung des Druckverlustes und dynamischer Instabilitäten (hier Dichtewellenoszillationen) in Wasser/Dampf-Strömungen mittels zweier unterschiedlicher Ansätze unter praxisnahen Bedingungen. Zum einen wird ein Versuchsstand entwickelt, aufgebaut und in Betrieb genommen, um mit diesem entsprechende Versuche an einem Verdampferrohr durchzuführen. Zum anderen werden dynamische Simulationen mit einem homogenen („mixture flow“) und einem heterogenen („two-fluid“) Strömungsmodell durchgeführt und miteinander und mit den Messdaten verglichen. Die experimentellen und numerischen Ergebnisse lassen sich schließlich in dimensionslosen Stabilitätskarten zusammenfassen, welche die Betriebsgrenzen beschreiben, bei denen Dichtewellenoszillationen in thermohydraulisch ähnlichen Systemen auftreten können.

I welcome the opportunity to have my book translated, because of the great emphasis on two-phase flow and heat transfer in the English-speaking world, as related to research, university education, and industrial practice. The 1988 Springer-Verlag edition of "Warmeiibergang beim Kondensieren und beim Sieden" has been enlarged to include additional material on falling film evaporation (Chapter 12) and pressure drop in two-phase flow (Chapter 13). Minor errors in the original text have also been corrected. I would like to express my sincere appreciation to Professor Green, Asso ciate Professor of German at Rensselaer, for his excellent translation and co operation. My thanks go also to Professor Bergles for his close attention to technical and linguistic details. He carefully read the typescript and made many comments and suggestions that helped to improve the manuscript. I hope that the English edition will meet with' a favorable reception and contribute to better understanding and to progress in the field of heat transfer in condensation and boiling. February 1992 K. Stephan Preface to the German-Language Edition This book is a continuation of the series "Heat and Mass Transfer" edited by U. Grigull, in which three volumes have already been published. Its aim is to acquaint students and practicing engineers with heat transfer during condensa tion and boiling, and is intended primarily for students and engineers in mechanical, chemical, electrical, and industrial processing engineering.

&Quot;This book explores flow through passages with hydraulic diameters from about 1 [mu]m to 3 mm, covering the range of minichannels and microchannels. Design equations along with solved examples and practice problems are also included to serve the needs of practicing engineers and students in a graduate course."--BOOK JACKET.

The unique feature of parallel channel flows is that the pressure drop or driving head for the flow is maintained constant across any given channel by the flow in all the others, or by having a large downcomer or bypass in a natural circulation loop. This boundary condition is common in all heat exchangers, reactor cores and boilers, it is well known that the two-phase flow in parallel channels can exhibit both so-called static and dynamic instability. This leads to the question of the separability of the flow and pressure drop boundary conditions in the study of stability and dryout. For the areas of practical interest, the flow can be considered as incompressible. The dynamic instability is characterized by density (kinematic) or continuity waves, and the static instability by inertial (pressure drop) or manometric escalations. The static has been considered to be the zero-frequency or lowest mode of the dynamic case. We briefly review the status of the existing literature on both parallel channel static and dynamic instability, and the latest developments in theory and experiment. The difference between the two derivations lies in the retention of the time-dependent terms in the conservation equations. The effects and impact of design options are also discussed. Since dryout in parallel systems follows instability, it has been traditional to determine the dryout power for a parallel channel by testing a single channel with a given (inlet) flow boundary condition without particular regard for the pressure drop. Thus all modern dryout correlations are based on constant or fixed flow tests, a so-called hard inlet, and subchannel and multiple bundle effects are corrected for separately. We review the thinking that lead to this approach, and suggest that for all multiple channel and natural circulation systems close attention should be paid to the actual (untested) pressure drop conditions. A conceptual formulation is suggested as a basis for discussion.

Laminar Flow Forced Convection in Ducts is a sourcebook for compact heat exchanger analytical data. This book describes the analytical solutions for laminar fluid flow and forced convection heat transfer in circular and noncircular pipes, including applicable differential equations and boundary conditions involving velocity and temperature problems of fluid flow. The book also discusses fluid flow—how much power is required to pump fluids through the heat exchanger, as well as the heat transfer—the determination of q" distribution, and the temperature of fluid and walls. The text also analyzes the coolant or heat transfer fluid flows in a nuclear power reactor composed of a bundle of circular section fuel rods located inside a round tube. R.A. Axford addresses fluid flow and heat transfers results for the rod bundle geometry in "Heat Transfer in Rod Bundles." The book also provides an overview and guidelines that can be used for the designer and the applied mathematician. This book is suitable for engineers working in electronics, aerospace, instrumentation, and biomechanics that use cooling or heating exchanges or solar collection systems.

The study of multiphase flows is of utmost interest for engineers who are more or less inevitably faced with them when handling various industrial processes or when dealing with environmental problems such as the dispersion of pollutants. It is also a large kingdom assembling many beautiful and weird landscapes in which wandering researchers may be caught by the fascination of precious stones or mysterious insets to deep and obscure caverns. Unfortunately, it is also an historically disconnected field of research, as testified by any textbook contents or by the scientific programs of conferences devoted to multiphase flows. For instance, is there a relation between fluidization and the study of interfacial waves, or between the behaviour of an annular film of liquid and the one of a free surface heated from below? The answer is indeed: yes. To help reveal some unity behind the avatars of multiphase flow behaviours, it has been decided to focus the interest on the instability phenomena. This book therefore provides the reader with most of the papers which have been accepted and/or presented at the international symposium on "instabilities in multiphase flows" held at the National Institute for Applied Science (INS A) in Rouen, France, from the 11 th of May to the 14th of May 1992. The topic of the conference has produced a strong emphasis on instability theory and nonlinear dynamics, including chaotic phenomena.