High-Velocity Impact Phenomena covers a wide range of pertinent topics dealing with impact phenomena. The book discusses hypervelocity accelerators; stress wave propagation in solids; and the theory of impact. The text also describes the application of the theory of impact on thin targets and shields and correlation with experiment; the numerical evaluation of hypervelocity impact phenomena; and analytical studies of impact-generated shock propagation. The equation of state of solids from shock wave studies; metallurgical observations and energy partitioning; and engineering considerations in hypervelocity impact are also encompassed. Design engineers will find the book invaluable.

The parameters governing the failure of thin metal plates under the impact of high-speed fragments are being studied; special emphasis is placed on the lightweight structural alloys. The geometrical features of the perforations, together with the spatial, mass, and velocity distributions of the ejecta produced in the perforation process, are considered. A few select target materials e.g., Al and Pb are currently being investigated under impact conditions that involve the same projectile geometry but different impact velocities. (Author).

This report on Hypervelocity Impact Phenomena consists of two sections describing methods and analyses of behind target effects in three metals and the development and performance of two new explosive projector systems that are to be applied to subsequent investigations of hypervelocity impact.

An experimental investigation of phenomena associated with the oblique hypervelocity impact of spherical projectiles on multisheet aluminum structures is described. A model that can be employed in the design of meteoroid and space debris protection systems for space structures is developed. The model consists of equations that relate crater and perforation damage of a multisheet structure to parameters such as projectile size, impact velocity, and trajectory obliquity. The equations are obtained through a regression analysis of oblique hypervelocity impact test data. This data shows that the response of a multisheet structure to oblique impact is significantly different from its response to normal hypervelocity impact. It was found that obliquely incident projectiles produce ricochet debris that can severely damage panels or instrumentation located on the exterior of a space structure. Obliquity effects of high-speed impact must, therefore, be considered in the design of any structure exposed to the meteoroid and space debris environment. Schonberg, William P. and Taylor, Roy A. and Horn, Jennifer R. Marshall Space Flight Center ...

This book contains the proceedings of EXPLOMETTM 2000, International Conference on Fundamental Issues and Applications of Shock-Wave and High-Strain-Rate Phenomena, held in Albuquerque, New Mexico, 2000; the fifth in the EXPLOMETTM quinquennial series which began in Albuquerque in 1980. The book is divided into five major sections with a total of 85 chapters. Section I deals with materials issues in shock and high strain rates while Section II covers shock consolidation, reactions, and synthesis. Materials aspects of ballistic and hypervelocity impact are covered in Section III followed by modeling and simulation in Section IV and a range of novel applications of shock and high-strain-rate phenomena in Section V. Like previous conference volumes published in 1980, 1985, and 1995, the current volume includes contributions from fourteen countries outside the United States. As a consequence, it is hoped that this book will serve as a global summary of current issues involving shock and high-strain-rate phenomena as well as a general reference and teaching componant for specializd curricula dealing with these features in a contemporary way. Over the past twenty years, the EXPLOMETTM Conferences have created a family of participants who not only converse every five years but who have developed long-standing interactions and professional relationships which continue to stimulate new concepts and applications particularly rooted in basic materials behavior.