While millions of Ford rear-wheel-drive cars are equipped with the durable and simple C4 and C6 transmissions of the 1960s, early in the 1980s Ford replaced those old designs with the AOD transmission for a new generation of cars. Overdrive gears, once popular before WWII, were now becoming popular again, as manufacturers were under increasing pressure to raise fuel economy to meet ever more demanding EPA standards. A nice byproduct of that was more comfortable cruising speeds, where your engine didn't have to work so hard in addition to getting better fuel economy. In Ford AOD Transmissions: Rebuilding and Modifying the AOD, AODE and 4R70W, author George Reid walks you through the process step-by-step, from removing the transmission from the vehicle, to complete disassembly and cleaning, to careful reassembly, to proper re-installation and road testing. Performance modifications are also covered, as well as an ID guide for various model numbers, evolutionary design changes, shift kit installation, and torque converter selection. This book is ideal for people who already have one of these transmissions in their car, as well as enthusiasts who would like to swap one of these more modern units into an older chassis to get all the benefits of overdrive. If you plan on researching or working on any one of these overdrive models, this book is a vital addition to your workbench or library.

Automatic AOD, BW 35/40, LE85/91/93/95/97, C4, C5, C6, C9, C10, FMX and M51. Manual 3 speed, 4 speed and 5 speed single rail, Top Loader, T5 and M57. Step by step instructions for a pull down and rebuild. Includes specifications, torque settings, problem diagnosis, shift speeds plus more information. This book is from an Australian publisher, and covers both American and Australian applications.

This revised and updated color edition of How to Rebuild the Small-Block Ford walks you step by step through a rebuild, including: planning your rebuild, disassembly and inspection, choosing the right parts, machine work, assembling your engine, and first firing and break-in.

Covers rear-wheel drive models (C3, C4, C5, C6, and AOD) and front-wheel drive models (ATX/FLC and AXOD). Included are the fundamentals, diagnosis techniques, and modifications.

In this definitive guide, the author explains the concept of building a stroker, paying special attention to the effect that increasing the bore and stroke have on the engine as a whole.

A driveline expert guides you through each step of the rebuild process for 8.8- and 9-inch axle assemblies, so you can confidently complete the work yourself. He explains in detail limited-slip and open differential disassembly, inspection, assembly, final calibration, and break-in. He also shows you how to identify worn ring-and-pinion gears, rebuild clutch packs, set the correct contact pattern for pinion and ring gears as well as the backlash, and much more.