This synthesis report will be of interest to pavement design, construction, management, and research engineers, highway safety officials, and others concerned with pavement friction characteristics. It describes the current state of the practice and discusses the methods used for evaluating wet pavement friction characteristics of new and restored pavements. This synthesis reviews models used for measuring and evaluating friction and texture, causes for friction changes over time, and aggregate and mix design to provide adequate friction. Also presented are construction and surface restoration practices for providing good pavement surface characteristics. In addition, considerations of noise and ride quality are discussed when compromise may be required.

This report contains guidelines and recommendations for managing and designing for friction on highway pavements. The contents of this report will be of interest to highway materials, construction, pavement management, safety, design, and research engineers, as well as others concerned with the friction and related surface characteristics of highway pavements.

This study objective was to determine pavement friction characteristics throughout the service life of hot mix bituminous surfaces based on coarse aggregate source. Data from 1286 sections of Interstate and Primary Roadways was used in this analysis. Friction tests were performed between 1974 and 1979 using a two wheel friction tester substantially complying with the requirements of AASHTO T242.

This synthesis will be of interest to construction, maintenance, pavement design, and materials engineers, pavement contractors, and others interested in the use of open-graded friction courses (OGFC) as an asphalt concrete pavement wearing surface. Information is provided on performance benefits and limitations of OGFC, material and mixture properties, and current construction practices in use in the United States and Europe. Advances in mixture design and construction techniques have overcome several of the performance limitations identified in early applications of OGFC, as well as enhanced the performance benefits associated with OGFC use. This report of the Transportation Research Board describes the current state of the practice with respect to the use of OGFC. Experience with the design, construction, and performance of OGFC is summarized, based on a review of the literature, documentation of experience from applications in the U.S. and Europe, and site visits to several states.

"This synthesis will be of a special interest to pavement designers, material engineers, and others concerned with upgrading pavements by application of asphalt friction surfaces. Guidelines are presented for deciding when it's appropriate to use various types of friction courses."--Avant-propos.