It is now 10 years since the first edition of Engineering Coatings by Stan Grainger appeared. The success of that edition, and the developments in the area since its publication make this new edition a valuable addition to the literature on the subject. This new edition describes the many methods by which surface coatings or surface modification can be carried out to delay surface degradation and prolong the useful life of engineering components. Since surface technology has advanced in many areas, new techniques such as the newer thermal spray processes and laser surfacing are now covered and the book has been expanded to include more coverage on corrosion. Major changes have also taken place in health and safety legislation, and the sections covering health and safety have been entirely revised as a result. Engineering Coatings with its breadth of coverage and sound basis in industrial practice is an invaluable guide to methods which have the potential to save money in many industries concerned with wear, corrosion, welding and thermal spraying of engineering components.

This extensively updated and revised version builds on the success of the first edition featuring new discoveries in powder technology, spraying techniques, new coatings applications and testing techniques for coatings -- Many new spray techniques are considered that did not exist when the first edition was published! The book begins with coverage of materials used, pre-spray treatment, and the techniques used. It then leads into the physics and chemistry of spraying and discusses coatings build-up. Characterization methods and the properties of the applied coatings are presented, and the book concludes with a lengthy chapters on thermal spray applications covers such areas as the aeronautics and space, automobiles, ceramics, chemicals, civil engineering, decorative coatings, electronics, energy generation and transport, iron and steel, medicine, mining and the nuclear industries.

This latest edition of Stan Grainger's original 1989 handbook reflects the many advances in surfacing technology since that time. Additional thermal spray processes and laser surfacing are included and more information on corrosion has been included. The major changes that have taken place in health and safety legislation have led to significant revisions in the relevant chapters.

Advances In Smart Coatings And Thin Films For Future Industrial and Biomedical Engineering Applications discusses in detail, the recent trends in designing, fabricating and manufacturing of smart coatings and thin films for future high-tech. industrial applications related to transportation, aerospace and biomedical engineering. Chapters cover fundamental aspects and diverse approaches used to fabricate smart self-healing anti-corrosion coatings, shape-memory coatings, polymeric and nano-bio-ceramic cotings, bio-inspired and stimuli-responsive coatings for smart surfaces with antibacterial activkity and controlled wettability, and electrically conductive coatings and their emerging applications. With the emphasis on advanced methodologies and recent emerging applications of smart multifunctional coatings and thin films, this book is essential reading for materials scientists and rsearchers working in chemical sciences, advanced materials, sensors, pharmaceutical and biomedical engineering. Discusses the most recent advances and innovations in smart multifunctional coatings and thin films in the transportation, aerospace and biomedical engineering industries Highlights the synthesis methods, processing, testing and characterization of smart coatings and thin films Reviews the current prospects and future trends within the industry

This book presents a general view on thin surface coatings used for tribological applications and it is based on the current state of understanding. The mechanisms of friction and wear in sliding and rolling contacts of coated surfaces are described. Basic information on coating techniques, tribology and surface mechanisms is given. Based on collected experimental works information is given on the properties of thin soft coatings, such as polymer, lamellar solid and soft metal coatings; thin hard coatings, such as nitride, carbide, oxide, boride and diamond and diamond-like coatings; and multi-component and multi-layer coatings. The influence of interface layers and lubricants is highlighted. The methods available for characterization of coated surfaces and for mechanical and chemical evaluation of their tribological properties are described. Tribological evaluation methods for accelerated and field testing and the need for standardization of quality assurance procedures are discussed. A methodology for the selection of thin coatings for tribological applications is presented and knowledge based expert system approaches for coating selection are reviewed. For different application examples, the basic tribological contact mechanisms are described and the possibilities for improving their tribological properties by using surface coatings are discussed. The application examples include sliding and rolling bearings, gears, tools for cutting and forming, erosion resistant applications, magnetic recording systems and bio-medical implants.

Marine biofouling can be defined as the undesirable accumulation of microorganisms, algae and animals on structures submerged in seawater. From the dawn of navigation, marine biofouling has been a major problem for shipping in such areas as reduced speed, higher fuel consumption and increased corrosion. It also affects industries using off-shore structures such as oil and gas production and aquaculture. Growing concerns about the environmental impact of antifouling coatings has led to major new research to develop more environmentally-friendly alternatives. Advances in marine antifouling coatings and technologies summaries this wealth of research and its practical implications. This book is divided into four sub-sections which discuss: marine fouling organisms and their impact, testing and development of antifouling coatings, developments in chemically-active marine antifouling technologies, and new surface approaches to the control of marine biofouling. It provides an authoritative overview of the recent advances in understanding the biology of fouling organisms, the latest developments on antifouling screening techniques both in the field and in the laboratory, research on safer active compounds and the progress on nontoxic coatings with tailor-made surface properties. With its distinguished editors and international team of contributors, Advances in marine antifouling coatings and technologies is a standard reference for manufacturers of marine antifouling solutions, the shipping industry, oil and gas producers, aquaculture and other industries using offshore structures, and academics researching this important area. Assesses marine antifouling organisms and their impact, including a historical review and directions for future research Discusses developments in antifouling coatings examining chemically-active and new surface approaches Reviews the environmentally friendly alternative of safer active compounds and the progress of non-toxic compounds

The past decade has seen a rapid development in the range of techniques which are available to modify the surfaces of engineering components. This in tum has led to the emergence of the new field of surface engineering the design of a composite system (coating plus substrate) that produces a performance which cannot be achieved by either the coating or substrate alone. With this expansion comes the problem of deciding on the correct surfacing technology for a given application. Clearly, to take full advantage of the benefits which surface engineering offers, there is a need to explain, in a structured way, the basic features and interrelationships of the most recently developed coatings and treatments. Advanced Surface Coatings satisfies this need by providing a concise and authoritative state-of-the art review of surface engineering. In chapter 1 the reader is provided with an insight into the surfacing technology appropriate for a given function. Chapter 2 reviews the principles of plasma generation (a theme which is central to many of the advanced surface treatments and coatings) and forms a solid foundation for the chap ters which follow. Chapters 3 to 10 each discuss the general principles on which the technology is based, followed by an appreciation of specific properties and application areas for materials treated by each particular method. These chapters cover ion implantation, ion-assisted coatings, evaporation, sputtering, physical vapour deposition, chemical vapour deposi tion, thermal spraying, and laser treatments.