Embedded System Design: Modeling, Synthesis and Verification introduces a model-based approach to system level design. It presents modeling techniques for both computation and communication at different levels of abstraction, such as specification, transaction level and cycle-accurate level. It discusses synthesis methods for system level architectures, embedded software and hardware components. Using these methods, designers can develop applications with high level models, which are automatically translatable to low level implementations. This book, furthermore, describes simulation-based and formal verification methods that are essential for achieving design confidence. The book concludes with an overview of existing tools along with a design case study outlining the practice of embedded system design. Specifically, this book addresses the following topics in detail: . System modeling at different abstraction levels . Model-based system design . Hardware/Software codesign . Software and Hardware component synthesis . System verification This book is for groups within the embedded system community: students in courses on embedded systems, embedded application developers, system designers and managers, CAD tool developers, design automation, and system engineering.

Modern embedded systems require high performance, low cost and low power consumption. Such systems typically consist of a heterogeneous collection of processors, specialized memory subsystems, and partially programmable or fixed-function components. This heterogeneity, coupled with issues such as hardware/software partitioning, mapping, scheduling, etc., leads to a large number of design possibilities, making performance debugging and validation of such systems a difficult problem. Embedded systems are used to control safety critical applications such as flight control, automotive electronics and healthcare monitoring. Clearly, developing reliable software/systems for such applications is of utmost importance. This book describes a host of debugging and verification methods which can help to achieve this goal. Covers the major abstraction levels of embedded systems design, starting from software analysis and micro-architectural modeling, to modeling of resource sharing and communication at the system level Integrates formal techniques of validation for hardware/software with debugging and validation of embedded system design flows Includes practical case studies to answer the questions: does a design meet its requirements, if not, then which parts of the system are responsible for the violation, and once they are identified, then how should the design be suitably modified?

What the experts have to say about Model-Based Testing for Embedded Systems: "This book is exactly what is needed at the exact right time in this fast-growing area. From its beginnings over 10 years ago of deriving tests from UML statecharts, model-based testing has matured into a topic with both breadth and depth. Testing embedded systems is a natural application of MBT, and this book hits the nail exactly on the head. Numerous topics are presented clearly, thoroughly, and concisely in this cutting-edge book. The authors are world-class leading experts in this area and teach us well-used and validated techniques, along with new ideas for solving hard problems. "It is rare that a book can take recent research advances and present them in a form ready for practical use, but this book accomplishes that and more. I am anxious to recommend this in my consulting and to teach a new class to my students." —Dr. Jeff Offutt, professor of software engineering, George Mason University, Fairfax, Virginia, USA "This handbook is the best resource I am aware of on the automated testing of embedded systems. It is thorough, comprehensive, and authoritative. It covers all important technical and scientific aspects but also provides highly interesting insights into the state of practice of model-based testing for embedded systems." —Dr. Lionel C. Briand, IEEE Fellow, Simula Research Laboratory, Lysaker, Norway, and professor at the University of Oslo, Norway "As model-based testing is entering the mainstream, such a comprehensive and intelligible book is a must-read for anyone looking for more information about improved testing methods for embedded systems. Illustrated with numerous aspects of these techniques from many contributors, it gives a clear picture of what the state of the art is today." —Dr. Bruno Legeard, CTO of Smartesting, professor of Software Engineering at the University of Franche-Comté, Besançon, France, and co-author of Practical Model-Based Testing

This book constitutes the refereed proceedings of the 4th IFIP TC 10 International Embedded Systems Symposium, IESS 2013, held in Paderborn, Germany, in June 2013. The 22 full revised papers presented together with 8 short papers were carefully reviewed and selected from 42 submissions. The papers have been organized in the following topical sections: design methodologies; non-functional aspects of embedded systems; verification; performance analysis; real-time systems; embedded system applications; and real-time aspects in distributed systems. The book also includes a special chapter dedicated to the BMBF funded ARAMIS project on Automotive, Railway and Avionics Multicore Systems.

This book constitutes the refereed proceedings of the 4th IFIP TC 10 International Embedded Systems Symposium, IESS 2013, held in Paderborn, Germany, in June 2013. The 22 full revised papers presented together with 8 short papers were carefully reviewed and selected from 42 submissions. The papers have been organized in the following topical sections: design methodologies; non-functional aspects of embedded systems; verification; performance analysis; real-time systems; embedded system applications; and real-time aspects in distributed systems. The book also includes a special chapter dedicated to the BMBF funded ARAMIS project on Automotive, Railway and Avionics Multicore Systems.

An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.

Almost each and every electronic gadget around us is an embedded system, for example: Smart phone, palmtop, digital watch, digital camera, printer, scanner, washer machine control panel, home security system, and many more. Embedded systems have revolutionized our society into a digital world due to the fact that they are microcontroller-based, compact in sizes, reliable in performance, and cheaper in cost. Book ContentsThis book will assist you to learn about embedded systems, its design and development process. Four serial phases: plan, design, integrated development (ID), design verification and validation (DV&V) are presented and discussed in this book.This book begins by introducing what the embedded system basics are. Chapter 1 present classification and aspect of embedded systems, describes embedded systems' hardware and software characteristics. Then it is continued by chapter 2 to depict a time-task span of the embedded system product development process.Chapter 3, 4, 5, and 6, each describes the four phases of the design and development process respectively, which are Plan (Chapter 3), Design (chapter 4), Integrated Development (Chapter 5), Design Verification and Validation (Chapter 6). Plan phase (Chapter 3) describes product requirement, cost analysis, development strategy, management plan, development methodology, design tools and equipment.Design phase (Chapter 4) go over each design process flows, and present descriptions on: hardware board design process, hardware PCB design process, signal integrity analysis and simulation, software design process, and FPGA design process.Integrated Development phase (Chapter 5) discuss on: mechanical and PCB preparations, parts acquisition, FPGA preparation, PCB assembly, hardware testing and debug, hardware/software integrated development, and virtual prototype.Design Verification and Validation phase (Chapter 6) present appearance inspection, functional testing, characteristics and measurements, performance testing, and ESD, EMC, safety testing.Appendixes in this book provide tables and descriptions on hardware and software design checklists, guidelines, and development tools for reference. Bold texts in the paragraphs shall represent a development process name, phase name, step name, or a term of the glossary, or an emphasis.Audience: This book is intentionally written for following audience: -Managers and team leaders who need to manage and guide embedded system design and development process effectively.-Engineers and technicians who want to speed up and optimize embedded system design and development process.-New graduates and students who want to study and learn embedded system design and development process.-Interested readers who want explore embedded system design and development process.