This title provides advice on provision, specification and construction of joints in in-situ concrete construction. It aims to help structural designers make informed decisions about the provision of joints in concrete structures.

This title provides advice on provision, specification and construction of joints in new in-situ concrete construction.

Many factors affect the amount of temperature-induced movement that occurs in a building and the extent to which this movement can occur before serious damage develops or extensive maintenance is required. In some cases joints are being omitted where they are needed, creating a risk of structural failures or causing unnecessary operations and maintenance costs. In other cases, expansion joints are being used where they are not required, increasing the initial cost of construction and creating space utilization problems. As of 1974, there were no nationally acceptable procedures for precise determination of the size and the location of expansion joints in buildings. Most designers and federal construction agencies individually adopted and developed guidelines based on experience and rough calculations leading to significant differences in the various guidelines used for locating and sizing expansion joints. In response to this complex problem, Expansion Joints in Buildings: Technical Report No. 65 provides federal agencies with practical procedures for evaluating the need for through-building expansion joints in structural framing systems. The report offers guidelines and criteria to standardize the practice of expansion joints in buildings and decrease problems associated with the misuse of expansions joints. Expansions Joints in Buildings: Technical Report No. 65 also makes notable recommendations concerning expansion, isolation, joints, and the manner in which they permit separate segments of the structural frame to expand and to contract in response to temperature fluctuations without adversely affecting the buildings structural integrity or serviceability.

This book details the basic concepts and the design rules included in Eurocode 3 "Design of steel structures" Part 1-8 "Design of joints". Joints in composite construction are also addressed through references to Eurocode 4 "Design of composite steel and concrete structures" Part 1-1 "General rules and rules for buildings". Moreover, the relevant UK National Annexes are also taken into account. Attention has to be duly paid to the joints when designing a steel or composite structure, in terms of the global safety of the construction, and also in terms of the overall cost, including fabrication, transportation and erection. Therefore, in this book, the design of the joints themselves is widely detailed, and aspects of selection of joint configuration and integration of the joints into the analysis and the design process of the whole construction are also fully covered. Connections using mechanical fasteners, welded connections, simple joints, moment-resisting joints and lattice girder joints are considered. Various joint configurations are treated, including beam-to-column, beam-to-beam, column bases, and beam and column splice configurations, under different loading situations (axial forces, shear forces, bending moments and their combinations). The book also briefly summarises the available knowledge relating to the application of the Eurocode rules to joints under fire, fatigue, earthquake, etc., and also to joints in a structure subjected to exceptional loadings, where the risk of progressive collapse has to be mitigated. Finally, there are some worked examples, plus references to already published examples and to design tools, which will provide practical help to practitioners.