This study considered three aspects of residential wood energy use in Alaska: current conditions and fuel consumption, knowledge and attitudes, and future use and conditions. We found that heating oil was the primary fuel for home heating in southeast and interior Alaska, whereas natural gas was used most often in south-central Alaska (Anchorage). Firewood heating played a much more important role as a secondary (vs. primary) heating source in all regions of Alaska. In interior Alaska, there was a somewhat greater interest in the use of wood energy compared to other regions. Likewise, consumption of fossil fuels was considerably greater in interior Alaska. Cost was a primary factor influencing motivation to convert to wood energy. Most respondents were at least somewhat familiar with residential wood-burning systems, however relatively few were familiar with Environmental Protection Agency certified woodstoves. Firewood/cordwood was by far the preferred wood fuel choice, whereas wood briquettes were least preferred. Similarly, firewood was the type of wood fuel that respondents were most familiar with. Variations were observed between Alaska's primary regions (southeast, south-central, and interior).

This study considered three aspects of residential wood energy use in Alaska: current conditions and fuel consumption, knowledge and attitudes, and future use and conditions. We found that heating oil was the primary fuel for home heating in southeast and interior Alaska, whereas natural gas was used most often in south-central Alaska (Anchorage). Firewood heating played a much more important role as a secondary (vs. primary) heating source in all regions of Alaska. In interior Alaska, there was a somewhat greater interest in the use of wood energy compared to other regions. Likewise, consumption of fossil fuels was considerably greater in interior Alaska. Cost was a primary factor influencing motivation to convert to wood energy. Most respondents were at least somewhat familiar with residential wood-burning systems, however relatively few were familiar with Environmental Protection Agency certified woodstoves. Firewood/cordwood was by far the preferred wood fuel choice, whereas wood briquettes were least preferred. Similarly, firewood was the type of wood fuel that respondents were most familiar with. Variations were observed between Alaska's primary regions (southeast, south-central, and interior). This could be attributed to a number of factors including colder climates in interior Alaska, and overall low use of wood energy in south-central Alaska because of preferences for natural gas. Fuel oil prices of $4.00 to $5.00 per gallon would be needed for most homeowners to convert to wood heating. There was a broad range of willingness to pay for new wood energy systems (from about $1,000 to $3,000). However, this survey was not random and results may not be representative of the populations at each sampling location.

The inadequate transportation infrastructure and undeveloped markets for sawmill residues in southeast Alaska are among the factors that limit the use of this forest resource. This study considers the potential use of sawmill residues to supply two bioenergy systems that would produce thermal energy for (1) community heating and (2) a lumber dry kiln in Hoonah, Alaska. The proposed community heating system would be a direct combustion system, burning approximately 1,450 green tons (1.315 green metric kilotons) of wood fuel per year to provide heating for seven centrally located buildings in Hoonah. Additional sawmill residues would be used in another system to provide process heat for a proposed 25,000 board foot (41.3 m3) dry kiln. The Hoonah sawmill typically produces as much as 5 million board feet (8,255 m3) of lumber per year, primarily from western hemlock and Sitka spruce. The processing of this amount of lumber would result in an adequate volume of residue to provide a fuel source for the heating requirements of the proposed projects. Wood residue from the sawmill is assumed to be available at no cost other than for transportation. Use of wood fuel for community heating would save an estimated 65,000 gallons (2.47 kL) of heating oil per year. Avoided fuel costs would be approximately $91,500 per year based on No. 2 fuel oil at a market price of $1.40 per gallon ($0.37 per liter). Based on a project life of 25 years and a contingency rate of 25%, the expected after-tax internal rate of return (IRR) for the community heating portion of the project is 29.6%. Total installed costs for the 1,195,000 Btu/h (350 kWthermal) community heating system, including distribution piping and its installation and backup oil systems, are estimated to be $631,000. For the lumber dry kiln, in the second heat-generating system, economic results were less favorable, with expected energy savings of $82,900 per year and an after-tax IRR of 24.1% (also assuming 25% contingency). Estimated installed cost of the 1,536,000 Btu/h (450 kWthermal) dry kiln system with a backup oil system is $513,800.

This report is concerned with the existing volumes of renewable wood energy products (RWEP) currently used in Alaska and the potential demand for RWEP for residential and community heating projects in the state. By using peak prices from the fall of 2008, the potential value of a British thermal unit (Btu) from various fuels has been calculated to identify those situations where wood-based fuels are economically competitive or advantageous when compared with alternative fuel sources. If fuel oil prices increase to the levels experienced in 2008, there would be a strong economic incentive to convert heating systems to use solid wood fuels. Charts and tables. This is a print on demand edition of an important, hard-to-find report.

Wood has become an important energy alternative in Alaska, particularly in rural areas where liquid fuel costs can be substantial. In some cases, wood fuel is readily available to communities, increasing the attractiveness of wood energy. Wood energy systems in rural Alaska can also lead to employment gains as well as benefits to local cash economies. Many Alaska villages are now considering wood as a fuel source for community heating, several have completed feasibility studies, and others are moving forward with design and construction activities. Cordwood is readily available in many regions of Alaska, although not always in commercial quantities. However, for many small-scale applications, efficient cordwood systems could be a viable energy option. In this paper, we provide a qualitative review of factors such as wood fuel availability, cordwood system size, wood fuel cost, wood quality, labor, fuel drying, and underground piping. Other general observations are noted, based on case studies of operating cordwood systems in Alaska.