This unique guide goes beyond all the USB specification overviews to provide designers with the expert knowledge and skills they need to design and implement USB I/O devices.

Developers who want to access USB devices from their embedded systems will find a helpful resource in USB Embedded Hosts: The Developer’s Guide. This new book from the author of USB Complete shows how small systems can take advantage of the same wealth of USB devices available to conventional PCs. The book begins with a review of USB host communication protocols. Readers then learn which USB host requirements are relaxed for embedded systems and what new requirements some embedded systems must meet. To help in selecting a development platform, the book explores available hardware and software for USB host communications in small systems. The heart of the book focuses on communicating with USB devices. The topics (with example code) include USB drives, keyboards, virtual serial ports, network bridges, mics, speakers, video cameras, and printers, plus devices that don’t fit defined USB classes. Also discussed are systems that support both USB host and device functions. The example code is written for the BeagleBoard-xM open development board using a distribution of Linux targeted to small systems. Also covered is how to use Linux commands and utilities to learn about, monitor, and debug communications with USB devices.

This is a "How-To" book which explains, with hands-on examples, how to design and implement a SuperSpeed USB peripheral that can interface to your hardware using a 32-bit 100MHz bus with standard or custom protocols. The book is based on the Cypress FX3 SuperSpeed Device and the firmware examples are written around a low-cost SuperSpeed Explorer board and a companion CPLD board which are available from www.cypress.com/fx3book. The software examples are written for the Windows operating system and the CPLD examples are written in Verilog. The source code for all of the examples is downloadable from the book web site. If you currently think that SuperSpeed USB design is only for the elite then look inside this book and discover that SuperSpeed technology has now been made accessible to the rest of us!

Computing: general.

This guide takes the pain out of designing for this popular interface with specific, detailed examples that show how to develop USB devices and the applications that communicate with them. How the USB communicates with the PC, deciding if a project should use a USB interface, choosing a USB controller chip for peripheral design, and determining code with Windows applications are covered in detail.

A guide to help programmers learn how to support computer peripherals under the Linux operating system, and how to develop new hardware under Linux. This third edition covers all the significant changes to Version 2.6 of the Linux kernel. Includes full-featured examples that programmers can compile and run without special hardware

Have you ever wondered how to use the USB hardware to send and receive data from an attached device? Wondered how to detect and initialize the controller, retrieve the device's descriptors, configure the device, and then communicate with it to send or retrieve its data? This book explains the ins and outs of the four major controllers, starting with the UHCI, OHCI, EHCI, and then the new Super Speed xHCI Controller. It explains in detail how to communicate with the various devices such as HID mice and keyboards, mass storage devices, including UASP devices, printers, and other USB devices. If you are interested in working with bare hardware to communicate with the USB, with no operating system to get in the way, you don't need to look any further. This book does not need to be on the shelf every USB enthusiast, it needs to be right on the desk. Third Edition -- 20180420