The intention of this book is that it should contain everything an engineer needs to know to be able to design and produce adhesively bonded joints which are required to carry significant loads. The advan tages and disadvantages of bonding are given, together with a sufficient understanding of the necessary mechanics and chemistry to enable the designer to make a sound engineering judgement in any particular case. The stresses in joints are discussed extensively so that the engineer can get sufficient philosophy or feel for them, or can delve more deeply into the mathematics to obtain quantitative solutions even with elasto plastic behaviour. A critical description is given of standard methods of testing adhesives, both destructively and non-destructively. The essen tial chemistry of adhesives and the importance of surface preparation are described and guidance is given for adhesive selection by me ans of check lists. For many applications, there will not be a unique adhesive which alone is suitable, and factors such as cost, convenience, produc tion considerations or familiarity may be decisive. A list of applications is given as examples. The authors wish to increase the confidence of engineers using adhesive bonding in load-bearing applications by the information and experience presented. With increasing experience of adhesives en gineering, design will become more elegant as weH as more fitted to its products.

Adhesive bonding is often effective, efficient, and often necessary way to join mechanical structures. This important book reviews the most recent improvements in adhesive bonding and their wide-ranging potential in structural engineering. Part one reviews advances in the most commonly used groups of structural adhesives with chapters covering topics such as epoxy, polyurethane, silicone, cyanoacrylate, and acrylic adhesives. The second set of chapters covers the various types of adherends and pre-treatment methods for a range of structural materials such as metals, composites and plastics. Chapters in Part three analyse methods and techniques with topics on joint design, life prediction, fracture mechanics and testing. The final group of chapters gives useful and practical insights into the problems and solutions of adhesive bonding in a variety of hostile environments such as chemical, wet and extreme temperatures. With its distinguished editor and international team of contributors, Advances in structural adhesive bonding is a standard reference for structural and chemical engineers in industry and the academic sector. Reviews advances in the most commonly used groups of structural adhesives including epoxy, silicone and acrylic adhesives Examines key issues in adhesive selection featuring substrate compatibility and manufacturing demands Documents advances in bonding metals, plastics and composites recognising problems and limitations

This timely book on structural adhesives joints showcases all the pertinent topics and will be of immense value to scientists and engineers in many industries. Most structures are comprised of a number of individual parts or components which have to be connected to form a system with integral load transmission path. The structural adhesive bonding represents one of the most enabling technologies to fabricate most complex structural configurations involving advanced materials (e.g. composites) for load-bearing applications. Quite recently there has been a lot of activity in harnessing nanotechnology (use of nanomaterials) in ameliorating the existing or devising better performing structural adhesives. The 10 chapters by subject matter experts look at the following issues: Surface preparation for structural adhesive joints (SAJ) Use of nanoparticles in enhancing performance of SAJ Optimization of SAJ Durability aspects of SAJ Debonding of SAJ Fracture mechanics of SAJ Failure analysis of SAJ Damage behavior in functionally graded SAJ Impact, shock and vibration characteristics of composites for SAJ Delamination arrest methods in SAJ

Adhesive bonding is increasingly regarded as a cost effective and effectual way to join mechanical structures. This book reviews recent improvements in adhesive bonding and their wide-ranging potential in structural engineering. Part one discusses methods for selecting the correct adhesive. The second set of chapters discusses the various types of adherents. A third set of chapters analyses methods and techniques for joint design. The final chapters give useful and practical insight into the problems and solutions of adhesive bonding in a variety of hostile environments such as chemical, wet, and extreme temperatures.

Adhesives in general and structural adhesives in particular are the subjects of much academic interest as well as commercial importance. Structural bonding, as a method of joining, offers a number of advantages over mechanical fastening. However, in order to achieve satisfactory results, the proper adhesive must be selected and the appropriate bonding procedures followed. The purpose of Structural Adhesives: Chemistry and Technology is to review the major classes of structural adhesives and the principles of adhesion and bonding as these relate to structural joints. Each chapter provides an overview of the topic under discussion with a list of references to the relevant literature. In addition to describing the chemistry involved, other aspects of structural adhesive technology are covered, such as formula tion, testing, and end uses. Some structural adhesives, especially epoxies and phenolics, have a long history of successful use and are now widely employed. Others, such as the structural acrylics and cyanoacrylates, are beginning to gain industrial acceptance. Urethanes and anaerobics have limited but important uses, while high-temperature adhesives are still largely in the research and development stage.

This volume documents the proceedings of the International Symposium on Adhesive Joints: Formation, Characteristics and Testing held under the auspices of the Division of Polymer Mater ials:Science and Engineering of the American Chemical Society in Kansas City, MO, September 12-17, 1982. There is a myriad of applications (ranging from aerospace to surgery) where adhesives are used to join different materials, and concomitantly the understanding of the behavior of adhesive joints becomes very important. There are many factors which can influence the behavior of adhesive joints, e.g., substrate preparation, in terfacial aspects, joint design, mode of stress, external environ ment, etc., and in order to understand the joint behavior in a holistic manner, one must take due cognizance of all these germane factors. So this symposium was planned to address not only how to make acceptable bonds but their characterization, durability and testing were also accorded due consideration.

Engineering and structural adhesives are distinguished from other adhesives by being high strength materials that are designed to support static or dynamic loads, often substantial loads. These adhesives are often subjected to cycling high and low temperatures and aggressive fluids or the weather. In general they are used for the bonding of rigid structures, although some degree of flexibility or toughness is often desirable in the adhesives to counter the effects of movement, impact or vibration. Although traditionally used in the metal working industries, these adhesives are now even more widely used with more modern materials. This Update describes the most important adhesives for engineering applications, including: Anaerobics; Epoxies; Reactive acrylics; Ultraviolet light cured (UV) adhesives; Polyurethanes; Reactive hot melt polyurethanes; and Special formulations of cyanoacrylates. It covers the basic chemistry, applications, advances in technology, and durability testing of these adhesives. Important breakthrough technologies are highlighted such as the use of organoboranes as initiators for the bonding of low surface energy plastics and the use of nano technology to improve properties. Key papers and patents are cited which represent some of the key developments in the subject.