Failure to adequately control any microbial challenge associated within process or product by robust sterilisation will result in a contaminated marketed product, with potential harm to the patient. Sterilisation is therefore of great importance to healthcare and the manufacturers of medical devices and pharmaceuticals. Sterility, sterilisation and sterility assurance for pharmaceuticals examines different means of rendering a product sterile by providing an overview of sterilisation methods including heat, radiation and filtration. The book outlines and discusses sterilisation technology and the biopharmaceutical manufacturing process, including aseptic filling, as well as aspects of the design of containers and packaging, as well as addressing the cleanroom environments in which products are prepared. Consisting of 18 chapters, the book comprehensively covers sterility, sterilisation and microorganisms; pyrogenicity and bacterial endotoxins; regulatory requirements and good manufacturing practices; and gamma radiation. Later chapters discuss e-beam; dry heat sterilisation; steam sterilisation; sterilisation by gas; vapour sterilisation; and sterile filtration, before final chapters analyse depyrogenation; cleanrooms; aseptic processing; media simulation; biological indicators; sterility testing; auditing; and new sterilisation techniques. Covers the main sterilisation methods of physical removal, physical alteration and inactivationIncludes discussion of medical devices, aseptically filled products and terminally sterilised productsDescribes bacterial, pyrogenic, and endotoxin risks to devices and products

Failure to adequately control any microbial challenge associated within process or product by robust sterilisation will result in a contaminated marketed product, with potential harm to the patient. Sterilisation is therefore of great importance to healthcare and the manufacturers of medical devices and pharmaceuticals. Sterility, sterilisation and sterility assurance for pharmaceuticals examines different means of rendering a product sterile by providing an overview of sterilisation methods including heat, radiation and filtration. The book outlines and discusses sterilisation technology and the biopharmaceutical manufacturing process, including aseptic filling, as well as aspects of the design of containers and packaging, as well as addressing the cleanroom environments in which products are prepared. Consisting of 18 chapters, the book comprehensively covers sterility, sterilisation and microorganisms; pyrogenicity and bacterial endotoxins; regulatory requirements and good manufacturing practices; and gamma radiation. Later chapters discuss e-beam; dry heat sterilisation; steam sterilisation; sterilisation by gas; vapour sterilisation; and sterile filtration, before final chapters analyse depyrogenation; cleanrooms; aseptic processing; media simulation; biological indicators; sterility testing; auditing; and new sterilisation techniques. Covers the main sterilisation methods of physical removal, physical alteration and inactivation Includes discussion of medical devices, aseptically filled products and terminally sterilised products Describes bacterial, pyrogenic, and endotoxin risks to devices and products

Assurance of Sterility for Sensitive Combination Products and Materials: New Paradigms for the Next Generation of Medical Devices and Pharmaceuticals discusses the medical device industry and existing challenges regarding the exciting new world of sensitive combination products (SCPs) and their terminal sterilization. This book reassesses the current assumptions to assure the patient's best interests are met in the development of increasingly rigorous sterilization methods used to counteract MRSA and other 'super-bugs'. In addition, the book discusses the special challenges faced with implantable medical devices, sterilization requirements and further methods needed for material selection and the design process. This book is unique in taking a holistic, end-to-end approach to sterilization, with a particular focus on materials selection and product design. Introduces sterilization principles at the material selection and design stages Addresses the industry need for new sterilization processes for new medical devices and biomaterials Provides guidance to select the appropriate sterilization technique for newly developed sensitive combination products Examines forward thinking tactics for matching new developments in material compatibility with possible regulatory and QSR strategies

Asceptic Pharmaceutical Manufacturing II explores the sophisticated technology, developments, and applications that allow aseptic processing to approach the sterility levels achieved with terminal sterilization. Written by experts in sterile manufacturing, this book covers aseptic technology, developments, and applications and makes a valuable contribution to understanding the issues involved in aseptic manufacture. Topics include the processing of biopharmaceuticals, lyophilization, personnel training, radiopharmaceuticals, hydrogen peroxide vapor sterilization, regulatory requirements, validation, and quality systems.

Pharmaceutical Monographs, Volume 3: Sterilisation and Disinfection provides a strong foundation for the proper use of disinfectants in practice. This monograph surveys the types of preparations required to be produced in a sterile condition and explains in detail the methods available for sterilization. This monograph is comprised of four parts. Part 1 discusses the purposes of sterilizing pharmaceutical preparations to prevent the infection of body tissues, fluids, or cavities with organisms that may produce damage or disease. Part 2 provides information concerning the extent of contamination of pharmaceutical materials, which is obtained by means of sterility tests. Part 3 focuses on autoclave design and an explanation is offered of the background against which sterilizers have been developed and the method in which their major components operate. Part 4 describes the various types of disinfectants, including halogens, phenols, alcohols, aldehydes, dyes, furan derivatives, amidines, surface-active compounds, and derivatives of quinolone and isoquinoline. This monograph is a valuable resource for undergraduate students of pharmacy and allied subjects.