Foundations on Expansive Soils provides the practicing engineer with a summary of the state-of-the-art of expansive soils and practical solutions based on the author's experience. The book is organized into two parts. Part I deals with theory and practice, and summarizes some of the theoretical physical properties of expansive soils. It also discusses various techniques employed to found structures on expansive soils such as drilled pier foundation, mat foundation, moisture control, soil replacement, and chemical stabilization. Topics covered include the origin, mineralogical composition, and the basic structure of expansive soils; the migration of water, swelling potential, and swelling pressure; site investigations and laboratory testing; moisture control; and soil stabilization. Part II presents case studies on the following: distress caused by pier uplift; distress caused by the improper design and construction of a drilled pier foundation system; distress caused by heaving of footing pad and floor slab; distress caused by heaving of continuous footings; and distress caused by a rise of ground water.

Expansive Soils provides the reader with easy and specific access to problems associated with expansive soils, characterisitics and treatment, and evaluation and remediation. Set up with contributions from worlwide expert, this main reference guide is intended for engineers, researchers and senior students working on soil

This book presents 09 keynote and invited lectures and 177 technical papers from the 4th International Conference on Geotechnics for Sustainable Infrastructure Development, held on 28-29 Nov 2019 in Hanoi, Vietnam. The papers come from 35 countries of the five different continents, and are grouped in six conference themes: 1) Deep Foundations; 2) Tunnelling and Underground Spaces; 3) Ground Improvement; 4) Landslide and Erosion; 5) Geotechnical Modelling and Monitoring; and 6) Coastal Foundation Engineering. The keynote lectures are devoted by Prof. Harry Poulos (Australia), Prof. Adam Bezuijen (Belgium), Prof. Delwyn Fredlund (Canada), Prof. Lidija Zdravkovic (UK), Prof. Masaki Kitazume (Japan), and Prof. Mark Randolph (Australia). Four invited lectures are given by Prof. Charles Ng, ISSMGE President, Prof.Eun Chul Shin, ISSMGE Vice-President for Asia, Prof. Norikazu Shimizu (Japan), and Dr.Kenji Mori (Japan).

Your guide to the design and construction of foundations onexpansive soils Foundation Engineering for Expansive Soils fills asignificant gap in the current literature by presenting coverage ofthe design and construction of foundations for expansive soils.Written by an expert author team with nearly 70 years of combinedindustry experience, this important new work is the only modernguide to the subject, describing proven methods for identifying andanalyzing expansive soils and developing foundation designsappropriate for specific locations. Expansive soils are found worldwide and are the leading cause ofdamage to structural roads. The primary problem that arises withregard to expansive soils is that deformations are significantlygreater than in non-expansive soils and the size and direction ofthe deformations are difficult to predict. Now, FoundationEngineering for Expansive Soils gives engineers and contractorscoverage of this subject from a design perspective, rather than atheoretical one. Plus, they'll have access to case studies coveringthe design and construction of foundations on expansive salts fromboth commercial and residential projects. Provides a succinct introduction to the basics of expansivesoils and their threats Includes information on both shallow and deep foundationdesign Profiles soil remediation techniques, backed-up with numerouscase studies Covers the most commonly used laboratory tests and siteinvestigation techniques used for establishing the physicalproperties of expansive soils If you're a practicing civil engineer, geotechnical engineer orcontractor, geologist, structural engineer, or an upper-levelundergraduate or graduate student of one of these disciplines,Foundation Engineering for Expansive Soils is a must-haveaddition to your library of resources.

A relatively economical and expedient numerical procedure and computer code based on the finite difference method were developed for predicting heave with time for heterogeneous expansive soils beneath structures idealized as two-dimensional. The computer code will also compute the potential heave assuming saturation of the foundation soils based on McDowell's swell data. The heave with time estimates should be useful for structures near which penetration of rainwater from the ground surface is permitted, provided that ponding of surface water and external water from leaking water and sewer lines does not occur. The potential heave should be useful if the foundation soils become saturated from excessive watering, poor surface drainage, and leaking water and sewer lines. The required input data include the structural load, specific gravity, liquid and plastic limits, initial dry density and water content, coefficient of vertical permeability, ratio of the horizontal to the vertical coefficient of permeability, and swell and suction relationships of the foundation soils.

More than ten years have passed since the first edition was published. During that period there have been a substantial number of changes in geotechnical engineering, especially in the applications of foundation engineering. As the world population increases, more land is needed and many soil deposits previously deemed unsuitable for residential housing or other construction projects are now being used. Such areas include problematic soil regions, mining subsidence areas, and sanitary landfills. To overcome the problems associated with these natural or man-made soil deposits, new and improved methods of analysis, design, and implementation are needed in foundation construction. As society develops and living standards rise, tall buildings, transportation facilities, and industrial complexes are increasingly being built. Because of the heavy design loads and the complicated environments, the traditional design concepts, construction materials, methods, and equipment also need improvement. Further, recent energy and material shortages have caused additional burdens on the engineering profession and brought about the need to seek alternative or cost-saving methods for foundation design and construction.