THE DEFINITIVE GUIDE TO SELECTING, OPERATING, AND MAINTAINING POWER PLANT EQUIPMENT Power Plant Equipment Operation and Maintenance Guide provides detailed coverage of different types of power plants such as modern co-generation, combined-cycle, and integrated gasification combined cycle (IGCC) plants. The book describes the design, selection, operation, maintenance, and economics of all these power plants. The best available power enhancement options are discussed, including duct burners, evaporative cooling, inlet-air chilling, absorption chilling, steam and water injection, and peak firing. This in-depth resource addresses the sizing, selection, calculations, operation, diagnostic testing, troubleshooting, maintenance, and refurbishment of all power plant equipment, including steam turbines, steam generators, boilers, condensers, heat exchangers, gas turbines, compressors, pumps, advanced sealing mechanisms, magnetic bearings, and advanced generators. Coverage includes: Methods for enhancing the reliability and maintainability of all power plants Economic analysis of modern co-generation and combined-cycle plants Selection of the best emission-reduction method for power plants Preventive and predictive maintenance required for power plants Gas turbine applications in power plants, protective systems, and tests

This is a practical, comprehensive guide for the selection, applications, operation, diagnostic testing, troubleshooting, maintenance, and refurbishment of all types of electrical equipment and systems used in power stations and in other industries.

We’ve all lived through long hot summers with power shortages, brownouts, and blackouts. But at last, all the what-to-do and how-to-do it information you’ll need to handle a full range of operation and maintenance tasks at your fingertips. Written by a power industry expert, Power Generation Handbook: Selection, Applications, Operation, Maintenance helps you to gain a thorough understanding of all components, calculations, and subsystems of the various types of gas turbines, steam power plants, co-generation, and combined cycle plants. Divided into five sections, Power Generation Handbook: Selection, Applications, Operation, Maintenance provides a thorough understanding of co-generation and combined cycle plants. Each of the components such as compressors, gas and steam turbines, heat recovery steam generators, condensers, lubricating systems, transformers, and generators are covered in detail. The selection considerations, operation, maintenance and economics of co-generation plants and combined cycles as well as emission limits, monitoring and governing systems will also be covered thoroughly. This all-in-one resource gives you step-by-step guidance on how to maximize the efficiency, reliability and longevity of your power generation plant.

The Best On-the-Job Guide to Industrial Plant Equipment and Systems This practical, one-of-a-kind field manual explains how equipment in industrial facilities operates and covers all aspects of commissioning relevant to engineers and project managers. Plant Equipment and Maintenance Engineering Handbook contains a data log of all major industrial and power plant components, describes how they function, and includes rules of thumb for operation. Hundreds of handy reference materials, such as calculations and tables, plus a comprehensive listing of electrical parts with common supplier nomenclature are also included in this time-saving resource. FEATURES DETAILED COVERAGE OF: Compressors * Air conditioning * Ash handling * Bearings and lubrication * Boilers * Chemical cleaning and Flushing * Condensers and circulating water systems * Controls * Conveyor systems * Cooling towers * Corrosion Deaerators * Diesel and gas turbines * Electrical * Fans * Fire protection * Fuels and combustion * Piping * Pumps Turbines * Vibration * Water treatment

The definitive reference on the role of steam in the production and operation of power plants for electric generation and industrial process applications For more than 80 years, Steam Plant Operation has been an unmatched source of information on steam power plants, including design, operation, and maintenance. The Tenth Edition emphasizes the importance of devising a comprehensive energy plan utilizing all economical sources of energy, including fossil fuels, nuclear power, and renewable energy sources. This trusted classic discusses the important role that steam plays in our power production and identifies the associated risks and potential problems of other energy sources. You will find concise explanations of key concepts, from fundamentals through design and operation. For energy students, Steam Plant Operation provides a solid introduction to steam power plant technology. This practical guide includes common power plant calculations such as plant heat rate, boiler efficiency, pump performance, combustion processes, and explains the systems necessary to control plant emissions. Numerous illustrations and clear presentation of the material will prove invaluable for those preparing for an operator’s license exam. Examples throughout show real-world application of the topics discussed. COVERAGE INCLUDES: • Steam and Its Importance • Boilers • Design and Construction of Boilers • Combustion of Fuels • Boiler Settings, Combustion Systems, and Auxiliary Equipment • Boiler Accessories • Operation and Maintenance of Boilers • Pumps • Steam Turbines, Condensers, and Cooling Towers • Operating and Maintaining Steam Turbines, Condensers, Cooling Towers, and Auxiliaries • Auxiliary Steam Plant Equipment • Environmental Control Systems • Waste-to-Energy Plants

A practical guide to increasing power plant operating uptime and profitability Power Plant Instrumentation and Controls provides a detailed description of power plant computer simulation and modern instrumentation and control systems that allow improvements in online power plant operating periods and thus profitability – minimizing unnecessary outages, maintenance activities, and downtime. The book reviews the many benefits of these different computer simulation programs, modern instrumentation, and control systems as they relate to plant safety, reliability, costs, efficiency, and emissions. It focuses on modern power generating plants – gas turbines, co-generation, and combined cycle plants. The book features a simulation program to determine the effects on turbine performance; turbine creep life; environmental emissions; and turbine life-cycle cost, revenue, and profitability of the following parameters: Variations in ambient temperature and pressure Inlet and exhaust losses Engine deterioration Different faults Power augmentation methods, including peak mode Water injection Control system performance, including proportional offset, integral windup, and trips Fuel type Variations in maintenance techniques and frequency Power generating plant outages are often due to unnecessary and improper maintenance activities and poor or outdated instrumentation and control systems, resulting in a significant reduction in profitability of power plant operation. This authoritative volume addresses these concerns and offers proven solutions. It is an essential next step to Kiameh's successful Power Generation Handbook and Power Plant Equipment Operation and Maintenance Guide. Power Plant Instrumentation and Controls includes Bar charts trending key turbine parameters Bar charts trending compressor characteristics and operating point during engine transients Tips for exporting simulated data to other software, such as Excel Exercises to illustrate use of simulation programs under different scenarios, including modern co-generation and combined-cycle plants In-depth coverage of smart instrumentation and advanced control systems used in modern power generating plants Details on selecting, commissioning, operating, diagnosing, and testing smart instrumentation, Distributed Control Systems, Supervisory Control and Data Acquisition (SCADA) systems, and all types of control valves, actuators, and positioners

“Process Plant Equipment Book is another great publication from Wiley as a reference book for final year students as well as those who will work or are working in chemical production plants and refinery...” -Associate Prof. Dr. Ramli Mat, Deputy Dean (Academic), Faculty of Chemical Engineering, Universiti Teknologi Malaysia “...give[s] readers access to both fundamental information on process plant equipment and to practical ideas, best practices and experiences of highly successful engineers from around the world... The book is illustrated throughout with numerous black & white photos and diagrams and also contains case studies demonstrating how actual process plants have implemented the tools and techniques discussed in the book. An extensive list of references enables readers to explore each individual topic in greater depth...” –Stainless Steel World and Valve World, November 2012 Discover how to optimize process plant equipment, from selection to operation to troubleshooting From energy to pharmaceuticals to food, the world depends on processing plants to manufacture the products that enable people to survive and flourish. With this book as their guide, readers have the information and practical guidelines needed to select, operate, maintain, control, and troubleshoot process plant equipment so that it is efficient, cost-effective, and reliable throughout its lifetime. Following the authors' careful explanations and instructions, readers will find that they are better able to reduce downtime and unscheduled shutdowns, streamline operations, and maximize the service life of processing equipment. Process Plant Equipment: Operation, Control, and Reliability is divided into three sections: Section One: Process Equipment Operations covers such key equipment as valves, pumps, cooling towers, conveyors, and storage tanks Section Two: Process Plant Reliability sets forth a variety of tested and proven tools and methods to assess and ensure the reliability and mechanical integrity of process equipment, including failure analysis, Fitness-for-Service assessment, engineering economics for chemical processes, and process component function and performance criteria Section Three: Process Measurement, Control, and Modeling examines flow meters, process control, and process modeling and simulation Throughout the book, numerous photos and diagrams illustrate the operation and control of key process equipment. There are also case studies demonstrating how actual process plants have implemented the tools and techniques discussed in the book. At the end of each chapter, an extensive list of references enables readers to explore each individual topic in greater depth. In summary, this text offers students, process engineers, and plant managers the expertise and technical support needed to streamline and optimize the operation of process plant equipment, from its initial selection to operations to troubleshooting.