Medical Coatings and Deposition Technologies is an important new addition to the libraries of medical device designers and manufacturers. Coatings enable the properties of the surface of a device to be controlled independently from the underlying bulk properties; they are often critical to the performance of the device and their use is rapidly growing. This book provides an introduction to many of the most important types of coatings used on modern medical devices as well as descriptions of the techniques by which they are applied and methods for testing their efficacy. Developers of new medical devices and those responsible for producing them will find it an important reference when deciding if a particular functionality can be provided by a coating and what limitations may apply in a given application. Written as a practical guide and containing many specific coating examples and a large number of references for further reading, the book will also be useful to students in materials science & engineering with an interest in medical devices. Chapters on antimicrobial coatings as well as coatings for biocompatibility, drug delivery, radiopacity and hardness are supported by chapters describing key liquid coating processes, plasma-based processes and chemical vapor deposition. Many types of coatings can be applied by more than one technique and the reader will learn the tradeoffs given the relevant design, manufacturing and economic constraints. The chapter on regulatory considerations provides important perspectives regarding the marketing of these coatings and medical devices.

This 3e, edited by Peter M. Martin, PNNL 2005 Inventor of the Year, is an extensive update of the many improvements in deposition technologies, mechanisms, and applications. This long-awaited revision includes updated and new chapters on atomic layer deposition, cathodic arc deposition, sculpted thin films, polymer thin films and emerging technologies. Extensive material was added throughout the book, especially in the areas concerned with plasma-assisted vapor deposition processes and metallurgical coating applications.

TRIBOLOGY AND CHARACTERIZATION OF SURFACE COATINGS The book provides updated information on the friction and wear behavior of coatings used in various industrial applications. Surface modification is a cost-effective process of increasing the life of components so that the whole device need not be changed if the surface is worn out. The tribological behavior of biological implants is currently an active topic and a thorough discussion is one of the book’s features. Tribology and Characterization of Surface Coatings explores key issues which are important in the research and development of surface coatings by providing updated information on friction and wear behavior of coatings used in different industrial applications. It covers the various coating deposition techniques, tribological response of nanocomposite coatings, multilayer hardfacing, and wear testing methods for coatings at nanoscale. The use of nanostructures may alter the tribological, characterization, and mechanical properties of the materials. Thermal spraying is the most widely used technique in industry for the deposition of coatings and their tribological properties need to be determined. This book also includes the recent trends in biotribology and the materials used in implants to counter the abrasive wear. Audience The book will serve as a reference to researchers, scientists, academicians, industrial engineers, and students who work in the fields of materials/polymer science and mechanical engineering. Apart from their applications to aerospace and electronics industries, the coatings are also used in the field of biomedical engineering.

Reflecting the progress in recent years, this book provides in-depth information on the preparation, chemistry, and engineering of bioceramic coatings for medical implants. It is authored by two renowned experts with over 30 years of experience in industry and academia, who know the potentials and pitfalls of the techniques concerned. Following an introduction to the principles of biocompatibility, they present the structures and properties of various bioceramics from alumina to zirconia. The main part of the work focuses on coating technologies, such as chemical vapor deposition, sol-gel deposition and thermal spraying. There then follows a discussion of the major interactions of bioceramics with bone or tissue cells, complemented by an overview of the in-vitro testing methods of the biomineralization properties of bioceramics. The text is rounded off by chapters on the functionalization of bioceramic coatings and a look at future trends. As a result, the authors bring together all aspects of the latest techniques for designing, depositing, testing, and implementing improved and novel bioceramic coating compositions, providing a full yet concise overview for beginners and professionals.

This second edition, edited by the world-renowned Dr. Rointain Bunshah, is an extensive update of the many improvements in deposition technologies, mechanisms, and applications. Considerably more material was added in Plasma Assisted Vapor Deposition processes, as well as Metallurgical Coating Applications.

A comprehensive guide to ultrananocrystalline-diamond (UNCDTM) and thin film technology for implantable and external medical devices, edited by a pioneer in the field. Covering synthesis and properties, clinical applications, and regulation, it is essential reading for researchers and practitioners in materials science and biomedical engineering.