Stay Up to Date on the Latest Issues in Maintenance Engineering The most comprehensive resource of its kind, Maintenance Engineering Handbook has long been a staple for engineers, managers, and technicians seeking current advice on everything from tools and techniques to planning and scheduling. This brand-new edition brings you up to date on the most pertinent aspects of identifying and repairing faulty equipment; such dated subjects as sanitation and housekeeping have been removed. Maintenance Engineering Handbook has been advising plant and facility professionals for more than 50 years. Whether you're new to the profession or a practiced veteran, this updated edition is an absolute necessity. New and updated sections include: Belt Drives, provided by the Gates Corporation Repair and Maintenance Cost Estimation Ventilation Fans and Exhaust Systems 10 New Chapters on Maintenance of Mechanical Equipment Inside: • Organization and Management of the Maintenance Function • Maintenance Practices • Engineering and Analysis Tools • Maintenance of Facilities and Equipment • Maintenance of Mechanical Equipment • Maintenance of Electrical Equipment • Instrumentation and Reliability Tools • Lubrication • Maintenance Welding • Chemical Corrosion Control and Cleaning

The fundamental purpose of this handbook, Maintenance Engineering Techniques, is to provide authoritative information requisite to the planning and implementation of effective maintenance engineering programs. A comprehensive discussion of maintenance engineering functions that must be accomplished in order to insure cost-effective acquisition, operation, and support of Army materiel is presented. The general method of presentation is to define a function and its importance, and then to provide basic information on when the function should be accomplished and the techniques that should be used. Although written primarily for maintenance engineers, the handbook is structured with a wider audience in mind. The level of detail and manner of presentation make the handbook useful for the orientation and guidance of new personnel, Army contractors, and personnel in engineering disciplines such as system design, reliability, maintainability, safety, and human engineering. Additionally, management personnel may improve their understanding of the scope and importance of maintenance engineering by reading the handbook.

This text is an accessible and comprehensive guide to the principles, practices, functions and challenges of maintenance engineering and management. With a strong emphasis on basic concepts and practical techniques throughout, the book demonstrates in detail how effective technical competencies in maintenance management can be built in engineering organizations. The book thus provides students and practising engineers alike with the methodologies and tools needed to understand and implement the systems approach to maintenance management. The major goals for the text include : To provide a good understanding of different types of maintenance management systems such as breakdown, preventive, predictive, proactive. To explain benefits of planned maintenance. To explain condition-based monitoring techniques with focus on vibration monitoring, thermography, and motor condition monitoring. To stress the role of reliability engineering in maintenance with tools like Failure Mode and Effect Analysis, Root Cause Analysis, and Criticality Matrix. To explain activities of maintenance planning with focus on shutdown planning, human resources development, and tools employed for monitoring. To emphasize management functions such as procurement of spares, measurement of maintenance effectiveness, etc. To give an overview of project management tools such as PERT etc. To introduce computerized maintenance management systems. To explain the basics of hazard analysis and fault tree analysis. Review questions in each chapter, worked-out examples wherever applicable, case studies and an exclusive appendix on “Selected Questions and Answers” are all designed to provoke critical thinking. This text is suitable for undergraduate and postgraduate courses in Maintenance Engineering taught in the department of mechanical engineering in almost all universities.

In this book the authors provide a fresh look at basic reliability and maintainability engineering techniques and management tools for ap plication to the system maintenance planning and implementation process. The essential life-cycle reliability centered maintenance (ReM) activities are focused on maintenance planning and the prevention of failure. The premise is that more efficient, and therefore effective, life-cycle main tenance programs can be established using a well disciplined decision logic analysis process that addresses individual part failure modes, their consequences, and the actual preventive maintenance tasks. This premise and the techniques and tools described emphasize preventive, not corrective, maintenance. The authors also describe the techniques and tools fundamental to maintenance engineering. They provide an understanding of the inter relationships of the elements of a complete ReM program (which are applicable to any complex system or component and are not limited only to the aircraft industry). They describe special methodologies for improving the maintenance process. These include an on-condition maintenance (OeM) methodology to identify defects and potential deterioration which can determine what is needed as a maintenance action in order to prevent failure during use.

To be able to compete successfully both at national and international levels, production systems and equipment must perform at levels not even thinkable a decade ago. Requirements for increased product quality, reduced throughput time and enhanced operating effectiveness within a rapidly changing customer demand environment continue to demand a high maintenance performance. In some cases, maintenance is required to increase operational effectiveness and revenues and customer satisfaction while reducing capital, operating and support costs. This may be the largest challenge facing production enterprises these days. For this, maintenance strategy is required to be aligned with the production logistics and also to keep updated with the current best practices. Maintenance has become a multidisciplinary activity and one may come across situations in which maintenance is the responsibility of people whose training is not engineering. This handbook aims to assist at different levels of understanding whether the manager is an engineer, a production manager, an experienced maintenance practitioner or a beginner. Topics selected to be included in this handbook cover a wide range of issues in the area of maintenance management and engineering to cater for all those interested in maintenance whether practitioners or researchers. This handbook is divided into 6 parts and contains 26 chapters covering a wide range of topics related to maintenance management and engineering.