Do you need guidelines for choosing a substitute organic solvent that is safer to use? Do you need an effective, cheap but perhaps temporary way to reduce exposures before you can convince your employer to spend money on a long-term or more reliable solution? Do you need information about local exhaust ventilation or personal protective equipment like respirators and gloves? Industrial Hygiene Control of Airborne Chemical Hazards provides the answers to these questions and more. Science-based and quantitative, the book introduces methods for controlling exposures in diverse settings, focusing squarely on airborne chemical hazards. It bridges the gap between existing knowledge of physical principles and their modern application with a wealth of recommendations, techniques, and tools accumulated by generations of IH practitioners to control chemical hazards. Provides a unique, comprehensive tool for facing the challenges of controlling chemical hazards in the workplace. Although William Popendorf has written the book at a fundamental level, he assumes the reader has some experience in science and math, as well as in manufacturing or other work settings with chemical hazards, but is inexperienced in the selection, design, implementation, or management of chemical exposure control systems. Where the book is quantitative, of course there are lots of formulae, but in general the author avoids vague notation and long derivations.

Are you a practicing occupational hygienist wondering how to find a substitute organic solvent that is safer to use than the hazardous one your company is using? Chapter 6 is your resource. Are you a new hygienist looking for an alternative technology as a nonventilation substitute for an existing hazard? Chapter 8 is your resource. Are you looking for an overview of ventilation? Chapters 10 and 11 are your resource? Are you an industrial hygiene student wanting to learn about local exhaust ventilation? Chapters 13 through 16 are your resource. Are you needing to learn about personal protective equipment and respirators? Chapters 21 and 22 are your resources. This new edition brings all of these topics and more right up-to-date with new material in each chapter, including new governmental regulations. While many of the controls of airborne hazards have their origins in engineering, this author has been diligent in explaining concepts, writing equations in understandable terms, and covering the topics of non-ventilation controls, both local exhaust and general ventilation, and receiver controls at the level needed by most IHs without getting too advanced. Taken as a whole, this book provides a unique, comprehensive tool to learn the challenging yet rewarding role that industrial hygiene can play in controlling airborne chemical hazards at work. Most chapters contain a set of practice problems with the solutions available to instructors. Features Written for the novice industrial hygienist but useful to prepare for ABIH certification Explains engineering concepts but requires no prior engineering background Includes specific learning goals that differentiate the depth of learning appropriate to each topic within the fuller information and explanations provided for each chapter Contains updated governmental regulations and abundant references Presents a consistent teaching philosophy and approach throughout the book Deals with both ventilation and non-ventilation controls

This book is a non-encyclopedic introductory textbook of industrial hygiene. Based on years of teaching a single-semester course on the topic, it presents a broad survey of the field and addresses the typical student. Introduction to Industrial Hygiene is divided into three sections. The first section focuses on chemical hazards, presenting the basics of toxicology, the problems of skin contact and inhalation, the detection and control of airborne contaminants, and the threat of fire or explosion. The first part also describes government regulations and the agencies that enforce them. The second part of the book discusses injury from physical causes, including sound, radiation, heat, and accidents. This part also contains an introduction to ergonomics. The third part describes a range of industries that are major sources of both employment and potential injury, and it applies the principles outlined in the first two parts. At the end of each chapter, the material covered is summarized in a Key Points section. References are provided both to background material and to sources that expand beyond the scope of the chapter. Problems sets have practical bases and lead students into the CFR to familiarize them with the contents and the manner of locating information in the CFR. Extensive appendices provide practical information and allow the text to continue being a valuable source of reference for the student.

The NIOSH Pocket Guide to Chemical Hazards presents information taken from the NIOSH/OSHA Occupational Health Guidelines for Chemical Hazards, from National Institute for Occupational Safety and Health (NIOSH) criteria documents and Current Intelligence Bulletins, and from recognized references in the fields of industrial hygiene, occupational medicine, toxicology, and analytical chemistry. The information is presented in tabular form to provide a quick, convenient source of information on general industrial hygiene practices. The information in the Pocket Guide includes chemical structures or formulas, identification codes, synonyms, exposure limits, chemical and physical properties, incompatibilities and reactivities, measurement methods, respirator selections, signs and symptoms of exposure, and procedures for emergency treatment.