Traffic engineers are often faced with operational and safety challenges at rural, high-speed signalized intersections. Vehicle-actuated control, combined with multiple advance detectors, is often used to improve operations and safety. However, this type of detection and control has not always resulted in a significant number of crashes. Crashes sometimes continue to occur at high-speed intersections, and delays to traffic movements can be unnecessarily long. An innovative detection-control system was developed for the Texas Department of Transportation to minimize both delay and crash frequency at rural intersections. This system was subsequently implemented at several intersections in Texas and its safety and operational benefits were evaluated. This report documents the findings and conclusions reached as a result of a three-year implementation project. The Detection-Control System was installed at each of eight intersections in Texas during the three-year period. Five of the intersections were suitable for a before-after study of safety and operational data. An evaluation of the before-after data indicated that the Detection-Control System was able to reduce delay by 14 percent, stop frequency by 9 percent, red-light violations by 58 percent, heavy-vehicle red-light violations by 80 percent, and severe crash frequency by 39 percent.

This report contains the results of the NC Department of Transportation research project Placement of Detection Loops on High Speed Approaches to Traffic Signals (HWY 2007-13). The goal of this project was to determine the best places to locate detectors on the approaches to high-speed signalized intersections and the best signal control strategy to employ in conjunction with those sensor placement ideas to minimize dilemma zone occurrences.

Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 38 (thesis year 1993) a total of 13,787 thesis titles from 22 Canadian and 164 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 38 reports theses submitted in 1993, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.