This book focuses on flight vehicles and their navigational systems, discussing different forms of flight structures and their control systems, from fixed wings to rotary crafts. Software simulation enables testing of the hardware without actual implementation, and the flight simulators, mechanics, glider development and navigation systems presented here are suitable for lab-based experimentation studies. It explores laboratory testing of flight navigational sensors, such as the magnetic, acceleration and Global Positioning System (GPS) units, and illustrates the six-axis inertial measurement unit (IMU) instrumentation as well as its data acquisition methodology. The book offers an introduction to the various unmanned aerial vehicle (UAV) systems and their accessories, including the linear quadratic regulator (LQR) method for controlling the rotorcraft. It also describes a Matrix Laboratory (MATLAB) control algorithm that simulates and runs the lab-based 3 degrees of freedom (DOF) helicopter, as well as LabVIEW software used to validate controller design and data acquisition. Lastly, the book explores future developments in aviation techniques.

Annotation Bridging the gap between academic research and real-world applications, this reference on modern flight control methods for fixed-wing aircraft deals with fundamentals of flight control systems design, then concentrates on applications based on the modern control methods used in the latest aircraft. The book is written for practicing engineers who are new to the aviation industry, postgraduate students in strategic or applied research, and advanced undergraduates. Some knowledge of classical control is assumed. Pratt is a member of IEEE and is UK Member for AIAA's Technical Committee on Guidance, Navigation and Control. Annotation c. Book News, Inc., Portland, OR (booknews.com)

The #1 guide to understanding the "why and how" of fly-by-wire flight control systems. This book is an approachable and easily understandable must-read for aviation professionals! Why don't new aircraft designs allow the pilots a mechanical control connection? This book explains how fly-by-wire fixes the top 5 problems with mechanical controls for high performance aircraft. Rather than describe a particular aircraft’s design with confusing acronyms, readers will get a "behind the scenes" understanding for the critical concepts that apply to any modern aircraft. Because these design principles are easily described and understood, readers of this book will be armed with knowledge as they approach their flight manual procedures. Including: - Problems with mechanical flight controls - Advantages of fly-by-wire - How and why can fly-by-wire control systems fail? - Why are four computers better than one or two? - Explanations of the control laws used by business jets, fighters, and airliners - What sensors are needed, and how the system maintains control when sensors are lost - Design considerations for risk mitigation in case of component failures Buy this book to read on your next layover!

This book provides a single comprehensive resource that reviews many of the current aircraft flight control programmes from the perspective of experienced practitioners directly involved in the projects. Each chapter discusses a specific aircraft flight programme covering the control system design considerations, control law architecture, simulation and analysis, flight test optimization and handling qualities evaluations. The programmes described have widely exploited modern interdisciplinary tools and techniques and the discussions include extensive flight test results. Many important `lessons learned' are included from the experience gained when design methods and requirements were tested and optimized in actual flight demonstration.

This book provides readers with a design approach to the automatic flight control systems (AFCS). The AFCS is the primary on-board tool for long flight operations, and is the foundation for the airspace modernization initiatives. In this text, AFCS and autopilot are employed interchangeably. It presents fundamentals of AFCS/autopilot, including primary subsystems, dynamic modeling, AFCS categories/functions/modes, servos/actuators, measurement devices, requirements, functional block diagrams, design techniques, and control laws. The book consists of six chapters. The first two chapters cover the fundamentals of AFCS and closed-loop control systems in manned and unmanned aircraft. The last four chapters present features of Attitude control systems (Hold functions), Flight path control systems (Navigation functions), Stability augmentation systems, and Command augmentation systems, respectively.

Aircraft Flight Dynamics and Control addresses airplane flight dynamics and control in a largely classical manner, but with references to modern treatment throughout. Classical feedback control methods are illustrated with relevant examples, and current trends in control are presented by introductions to dynamic inversion and control allocation. This book covers the physical and mathematical fundamentals of aircraft flight dynamics as well as more advanced theory enabling a better insight into nonlinear dynamics. This leads to a useful introduction to automatic flight control and stability augmentation systems with discussion of the theory behind their design, and the limitations of the systems. The author provides a rigorous development of theory and derivations and illustrates the equations of motion in both scalar and matrix notation. Key features: Classical development and modern treatment of flight dynamics and control Detailed and rigorous exposition and examples, with illustrations Presentation of important trends in modern flight control systems Accessible introduction to control allocation based on the author's seminal work in the field Development of sensitivity analysis to determine the influential states in an airplane's response modes End of chapter problems with solutions available on an accompanying website Written by an author with experience as an engineering test pilot as well as a university professor, Aircraft Flight Dynamics and Control provides the reader with a systematic development of the insights and tools necessary for further work in related fields of flight dynamics and control. It is an ideal course textbook and is also a valuable reference for many of the necessary basic formulations of the math and science underlying flight dynamics and control.

The second edition of Flight Stability and Automatic Control presents an organized introduction to the useful and relevant topics necessary for a flight stability and controls course. Not only is this text presented at the appropriate mathematical level, it also features standard terminology and nomenclature, along with expanded coverage of classical control theory, autopilot designs, and modern control theory. Through the use of extensive examples, problems, and historical notes, author Robert Nelson develops a concise and vital text for aircraft flight stability and control or flight dynamics courses.