Fault-Tolerant Systems is the first book on fault tolerance design with a systems approach to both hardware and software. No other text on the market takes this approach, nor offers the comprehensive and up-to-date treatment that Koren and Krishna provide. This book incorporates case studies that highlight six different computer systems with fault-tolerance techniques implemented in their design. A complete ancillary package is available to lecturers, including online solutions manual for instructors and PowerPoint slides. Students, designers, and architects of high performance processors will value this comprehensive overview of the field. The first book on fault tolerance design with a systems approach Comprehensive coverage of both hardware and software fault tolerance, as well as information and time redundancy Incorporated case studies highlight six different computer systems with fault-tolerance techniques implemented in their design Available to lecturers is a complete ancillary package including online solutions manual for instructors and PowerPoint slides

There are many applications in which the reliability of the overall system must be far higher than the reliability of its individual components. In such cases, designers devise mechanisms and architectures that allow the system to either completely mask the effects of a component failure or recover from it so quickly that the application is not seriously affected. This is the work of fault-tolerant designers and their work is increasingly important and complex not only because of the increasing number of “mission critical? applications, but also because the diminishing reliability of hardware means that even systems for non-critical applications will need to be designed with fault-tolerance in mind. Reflecting the real-world challenges faced by designers of these systems, this book addresses fault tolerance design with a systems approach to both hardware and software. No other text on the market takes this approach, nor offers the comprehensive and up-to-date treatment Koren and Krishna provide. Students, designers and architects of high performance processors will value this comprehensive overview of the field. * The first book on fault tolerance design with a systems approach * Comprehensive coverage of both hardware and software fault tolerance, as well as information and time redundancy * Incorporated case studies highlight six different computer systems with fault-tolerance techniques implemented in their design * Available to lecturers is a complete ancillary package including online solutions manual for instructors and PowerPoint slides

Software patterns have revolutionized the way developer’s and architects think about how software is designed, built and documented. This new title in Wiley’s prestigious Series in Software Design Patterns presents proven techniques to achieve patterns for fault tolerant software. This is a key reference for experts seeking to select a technique appropriate for a given system. Readers are guided from concepts and terminology, through common principles and methods, to advanced techniques and practices in the development of software systems. References will provide access points to the key literature, including descriptions of exemplar applications of each technique. Organized into a collection of software techniques, specific techniques can be easily found with sufficient detail to allow appropriate choices for the system being designed.

Real-time computer systems are very often subject to dependability requirements because of their application areas. Fly-by-wire airplane control systems, control of power plants, industrial process control systems and others are required to continue their function despite faults. Fault-tolerance and real-time requirements thus constitute a kind of natural combination in process control applications. Systematic fault-tolerance is based on redundancy, which is used to mask failures of individual components. The problem of replica determinism is thereby to ensure that replicated components show consistent behavior in the absence of faults. It might seem trivial that, given an identical sequence of inputs, replicated computer systems will produce consistent outputs. Unfortunately, this is not the case. The problem of replica non-determinism and the presentation of its possible solutions is the subject of Fault-Tolerant Real-Time Systems: The Problem of Replica Determinism. The field of automotive electronics is an important application area of fault-tolerant real-time systems. Systems like anti-lock braking, engine control, active suspension or vehicle dynamics control have demanding real-time and fault-tolerance requirements. These requirements have to be met even in the presence of very limited resources since cost is extremely important. Because of its interesting properties Fault-Tolerant Real-Time Systems gives an introduction to the application area of automotive electronics. The requirements of automotive electronics are a topic of discussion in the remainder of this work and are used as a benchmark to evaluate solutions to the problem of replica determinism.

The seriesAdvancesinIndustrialControl aims to report and encourage te- nologytransfer in controlengineering. The rapid development of controlte- nology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies. . . , new challenges. Much of this devel- ment work resides in industrial reports, feasibility study papers, and the - ports of advanced collaborative projects. The series o?ers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. Control system design and technology continues to develop in many d- ferent directions. One theme that the Advances in Industrial Control series is following is the application of nonlinear control design methods, and the series has some interesting new commissions in progress. However, another theme of interest is how to endow the industrial controller with the ability to overcome faults and process degradation. Fault detection and isolation is a broad ?eld with a research literature spanning several decades. This topic deals with three questions: • How is the presence of a fault detected? • What is the cause of the fault? • Where is it located? However, there has been less focus on the question of how to use the control system to accommodate and overcome the performance deterioration caused by the identi?ed sensor or actuator fault.

This book presents the most important fault-tolerant distributed programming abstractions and their associated distributed algorithms, in particular in terms of reliable communication and agreement, which lie at the heart of nearly all distributed applications. These programming abstractions, distributed objects or services, allow software designers and programmers to cope with asynchrony and the most important types of failures such as process crashes, message losses, and malicious behaviors of computing entities, widely known under the term "Byzantine fault-tolerance". The author introduces these notions in an incremental manner, starting from a clear specification, followed by algorithms which are first described intuitively and then proved correct. The book also presents impossibility results in classic distributed computing models, along with strategies, mainly failure detectors and randomization, that allow us to enrich these models. In this sense, the book constitutes an introduction to the science of distributed computing, with applications in all domains of distributed systems, such as cloud computing and blockchains. Each chapter comes with exercises and bibliographic notes to help the reader approach, understand, and master the fascinating field of fault-tolerant distributed computing.

Fault-Tolerant Systems, Second Edition, is the first book on fault tolerance design utilizing a systems approach to both hardware and software. No other text takes this approach or offers the comprehensive and up-to-date treatment that Koren and Krishna provide. The book comprehensively covers the design of fault-tolerant hardware and software, use of fault-tolerance techniques to improve manufacturing yields, and design and analysis of networks. Incorporating case studies that highlight more than ten different computer systems with fault-tolerance techniques implemented in their design, the book includes critical material on methods to protect against threats to encryption subsystems used for security purposes. The text’s updated content will help students and practitioners in electrical and computer engineering and computer science learn how to design reliable computing systems, and how to analyze fault-tolerant computing systems. Delivers the first book on fault tolerance design with a systems approach Offers comprehensive coverage of both hardware and software fault tolerance, as well as information and time redundancy Features fully updated content plus new chapters on failure mechanisms and fault-tolerance in cyber-physical systems Provides a complete ancillary package, including an on-line solutions manual for instructors and PowerPoint slides