This book reports on a set of new techniques for resolving current issues in networked control systems. The main focus is on strategies for event-based control, for both centralized and decentralized architectures. The first part of the book addresses the problem of single-loop networked control systems and proposes an anticipative remote controller for dealing with delays and packet losses. The second part of the book proposes a distributed event-based control strategy for networked dynamical systems, which has been implemented in a test-bed of mobile robots, and provides readers with a thorough description of an interactive simulator used to validate the results. This thesis, examined at the Universidad Nacional de Educación a Distancia in 2013, received the award for best thesis in control engineering from the Control Engineering group of the Spanish Committee of Automatic Control in 2015.

The insertion of communication networks in feedback control loops complicates analysis and synthesis of cyber-physical systems (CPSs), and network-induced uncertainties may degrade system control performance. Thus, this book researches networked delay compensation and event-triggered control approaches for a series of CPSs subject to network-induced uncertainties. The authors begin with an introduction to the concepts and challenges of CPSs, followed by an overview of networked control approaches and event-triggered control strategies in CPSs. Then, networked delay compensation and event-triggered control approaches are proposed for CPSs with network communication delay, data dropout, signal quantization, and event-triggered communication. More specifically, networked delay compensation approaches are proposed for linear/nonlinear networked controlled plants with time-varying and random network communication delays and data dropouts. To reduce computational burden and network communication loads in CPSs, event-triggered control, self-triggered control, co-design of event-triggered control and quantized control techniques, and event-triggered disturbance rejection control approaches are also presented. This book is an essential text for researchers and engineers interested in cybersecurity, networked control, and CPSs. It would also prove useful for graduate students in the fields of science, engineering, and computer science.

This edited monograph includes state-of-the-art contributions on continuous time dynamical networks with delays. The book is divided into four parts. The first part presents tools and methods for the analysis of time-delay systems with a particular attention on control problems of large scale or infinite-dimensional systems with delays. The second part of the book is dedicated to the use of time-delay models for the analysis and design of Networked Control Systems. The third part of the book focuses on the analysis and design of systems with asynchronous sampling intervals which occur in Networked Control Systems. The last part of the book exposes several contributions dealing with the design of cooperative control and observation laws for networked control systems. The target audience primarily comprises researchers and experts in the field of control theory, but the book may also be beneficial for graduate students.

This book approaches its subject matter in a way that provides Lyapunov function analysis and event-triggered design methods for switched dynamic systems in terms of sampled-data control, hysteresis switching control, and fault-tolerant control. This book presents several novel design methods on event-triggered control of switched linear systems, in which the events inclusively consist of not only switching itself but events occurring as the switched systems evolve. The features of our approaches lie in threefold: i) In the framework of sampled-data control, a bond between the sampling period and the average dwell time of the asynchronous switched linear neutral systems is revealed, with which stabilization conditions are derived for periodic sampling and event-triggered sampling mechanisms, respectively. ii) New event-triggered control strategies are proposed for switched linear systems and switched delay systems including switched neutral systems. The Zeno phenomenon can be excluded easily since the constant threshold can guarantee the existence of minimum positive lower bound between two continuous sampling intervals. iii). Two new fault-tolerant control methods are presented for switched cascade systems, with structural uncertainties existing in both system matrices and input matrices of the linear subsystems, by using the average dwell-time techniques. The proposed control design works on both the switched systems with actuator faults and its nominal systems (i.e., without actuator faults) without necessarily changing any structures and/or parameters of the proposed controllers. This book presents several systematical analysis and design methods for event-triggered control of switched systems in terms of the Lyapunov-based stability. It is of great significance to theoretical research and practical applications for switched systems. The book provides a unified framework of sampled-data control, including periodic sampled-data control and event-triggered control, and fault-tolerant control of switched systems. It serves as a useful book for researchers and graduate students who are interested in knowing the state of the art of analysis and synthesis of switched systems. In addition, it is also a useful source of up-to-date design methods for researchers who study switched dynamic systems and graduate students of control theory and control engineering.

Controlling uncertain networked control system (NCS) with limited communication among subcomponents is a challenging task and event-based sampling helps resolve the issue. This book considers event-triggered scheme as a transmission protocol to negotiate information exchange in resilient control for NCS via a robust control algorithm to regulate the closed loop behavior of NCS in the presence of mismatched uncertainty with limited feedback information. It includes robust control algorithm for linear and nonlinear systems with verification. Features: Describes optimal control based robust control law for event-triggered systems. States results in terms of Theorems and Lemmas supported with detailed proofs. Presents the combination of network interconnected systems and robust control strategy. Includes algorithmic steps for precise understanding of the control technique. Covers detailed problem statement and proposed solutions along with numerical examples. This book aims at Senior undergraduate, Graduate students, and Researchers in Control Engineering, Robotics and Signal Processing.

This book nds its origin in the WIDE PhD School on Networked Control Systems, which we organized in July 2009 in Siena, Italy. Having gathered experts on all the aspects of networked control systems, it was a small step to go from the summer school to the book, certainly given the enthusiasm of the lecturers at the school. We felt that a book collecting overviewson the important developmentsand open pr- lems in the eld of networked control systems could stimulate and support future research in this appealing area. Given the tremendouscurrentinterests in distributed control exploiting wired and wireless communication networks, the time seemed to be right for the book that lies now in front of you. The goal of the book is to set out the core techniques and tools that are ava- able for the modeling, analysis and design of networked control systems. Roughly speaking, the book consists of three parts. The rst part presents architectures for distributed control systems and models of wired and wireless communication n- works. In particular, in the rst chapter important technological and architectural aspects on distributed control systems are discussed. The second chapter provides insight in the behavior of communication channels in terms of delays, packet loss and information constraints leading to suitable modeling paradigms for commu- cation networks.

This thesis deals with event-triggered model predictive control (MPC) strategies for constrained networked and distributed control systems. A networked control system usually consists of spatially distributed sensors, actuators and controllers that communicate over a shared communication network. Event-triggered control approaches consider the network utilization in the controller design to provide a compromise between control performance and communication effort. In this thesis a holistic output-based MPC scheme for constrained linear systems with event-triggered communication over the sensor-to-controller and controller-to-actuator channels of a network is presented. The proposed approach can be applied to centralized as well as decentralized setups and handles bounded time-varying sampling intervals and transmission delays for the control of constrained sampled-data systems. In distributed control set-ups the overall plant is decomposed into subsystems which are controlled by local controllers. Different distributed model predictive control (DMPC) approaches with reduced communication effort are presented in this thesis. The first approach is non-iterative and uses event-triggered communication for the exchange of state measurements. In the second approach, an event-triggered cooperation strategy for DMPC based on distributed optimization is introduced. Finally, an economic DMPC scheme for linear periodically time-varying systems which is motivated by two real-world applications, the control of a water distribution network and a medium voltage power grid, is presented.