The concept of CAST as Computer Aided Systems Theory was introduced by F. Pichler in the late 1980s to refer to computer theoretical and practical developments as tools for solving problems in system science. It was thought of as the third component (the other two being CAD and CAM) required to complete the path from computer and systems sciences to practical developments in science and engineering. Franz Pichler, of the University of Linz, organized the first CAST workshop in April 1988, which demonstrated the acceptance of the concepts by the scientific and technical community. Next, the University of Las Palmas de Gran Canaria joined the University of Linz to organize the first international meeting on CAST (Las Palmas, February 1989) under the name EUROCAST'89. This proved to be a very successful gathering of systems theorists, computer scientists and engineers from most European countries, North America and Japan. It was agreed that EUROCAST international conferences would be organized every two years, alternating between Las Palmas de Gran Canaria and a continental European location. From 2001 the conference has been held exclusively in Las Palmas. Thus, successive EUROCAST meetings took place in Krems (1991), Las Palmas (1993), In- bruck (1995), Las Palmas (1997), Vienna (1999), Las Palmas (2001), Las Palmas (2003) Las Palmas (2005) and Las Palmas (2007), in addition to an extra-European CAST c- ference in Ottawa in 1994.

The two-volume proceedings, LNCS 6927 and LNCS 6928, constitute the papers presented at the 13th International Conference on Computer Aided Systems Theory, EUROCAST 2011, held in February 2011 in Las Palmas de Gran Canaria, Spain. The total of 160 papers presented were carefully reviewed and selected for inclusion in the books. The contributions are organized in topical sections on concepts and formal tools; software applications; computation and simulation in modelling biological systems; intelligent information processing; heurist problem solving; computer aided systems optimization; model-based system design, simulation, and verification; computer vision and image processing; modelling and control of mechatronic systems; biomimetic software systems; computer-based methods for clinical and academic medicine; modeling and design of complex digital systems; mobile and autonomous transportation systems; traffic behaviour, modelling and optimization; mobile computing platforms and technologies; and engineering systems applications.

The two-volume set LNCS 10671 and 10672 constitutes the thoroughly refereed proceedings of the 16th International Conference on Computer Aided Systems Theory, EUROCAST 2017, held in Las Palmas de Gran Canaria, Spain, in February 2017. The 117 full papers presented were carefully reviewed and selected from 160 submissions. The papers are organized in topical sections on: pioneers and landmarks in the development of information and communication technologies; systems theory, socio-economic systems and applications; theory and applications of metaheuristic algorithms; stochastic models and applications to natural, social and technical systems; model-based system design, verification and simulation; applications of signal processing technology; algebraic and combinatorial methods in signal and pattern analysis; computer vision, deep learning and applications; computer and systems based methods and electronics technologies in medicine; intelligent transportation systems and smart mobility.

The concept of CAST as Computer Aided Systems Theory was introduced by F. Pichler in the late 1980s to refer to computer theoretical and practical developments as tools for solving problems in system science. It was thought of as the third component (the other two being CAD and CAM) required to complete the path from computer and systems sciences to practical developments in science and engineering. Franz Pichler, of the University of Linz, organized the first CAST workshop in April 1988, which demonstrated the acceptance of the concepts by the scientific and technical community. Next, the University of Las Palmas de Gran Canaria joined the University of Linz to organize the first international meeting on CAST (Las Palmas, February 1989) under the name EUROCAST'89. This proved to be a very successful gathering of systems theorists, computer scientists and engineers from most European countries, North America and Japan. It was agreed that EUROCAST international conferences would be organized every two years, alternating between Las Palmas de Gran Canaria and a continental European location. From 2001 the conference has been held exclusively in Las Palmas. Thus, successive EUROCAST meetings took place in Krems (1991), Las Palmas (1993), In- bruck (1995), Las Palmas (1997), Vienna (1999), Las Palmas (2001), Las Palmas (2003) Las Palmas (2005) and Las Palmas (2007), in addition to an extra-European CAST c- ference in Ottawa in 1994.

This volume constitutes the papers presented at the 15th International Conference on Computer Aided Systems Theory, EUROCAST 2015, held in February 2015 in Las Palmas de Gran Canaria, Spain. The total of 107 papers presented were carefully reviewed and selected for inclusion in the book. The contributions are organized in topical sections on Systems Theory and Applications; Modelling Biological Systems; Intelligent Information Processing; Theory and Applications of Metaheuristic Algorithms; Computer Methods, Virtual Reality and Image Processing for Clinical and Academic Medicine; Signals and Systems in Electronics; Model-Based System Design, Verification, and Simulation; Digital Signal Processing Methods and Applications; Modelling and Control of Robots; Mobile Platforms, Autonomous and Computing Traffic Systems; Cloud and Other Computing Systems; and Marine Sensors and Manipulators.