Computer-assisted imaging with radiation (x- and gamma rays) is an integral part of modern medical-diagnostic practice. This imaging technology is also slowly finding its way into industrial applications. Although the technology is well developed, there is a need for further improvement to enhance image quality, reduce artifacts, minimize patient radiation exposure, compete with and complement other imaging methods (such as magnetic resonance imaging and ultrasonics), and accommodate dense and large objects encountered in industrial applications.Scientists and engineers, attempting to progress this technology, are faced with an enormous amount of literature, addressing the imaging problem from various view points. This book provides a single source that addresses both the physical and mathematical aspects of the imaging problem in a consistent and comprehensive manner. Discusses the inherent physical and numerical capabilities and limitations of the methods presented for both the forward and inverse problems Provides information on available Internet resources and software Written in a manner that makes it readable by physicists, mathematicians, engineers and computer scientists – avoids, as much as possible, the use of specialized terminology without clear introduction and definition

This book addresses radiation protection of patients having digital radiography and computed tomography (CT) examinations. The literature on radiation doses to patients from these two modalities have reported that the doses to patients are high. As a result, the radiology community has focused on methods and procedures to keep these doses as low as reasonably achievable (ALARA) without compromising the diagnostic image quality. This book outlines the motivation for dose optimization in radiology, identifies and describes the ICRP principle of optimization, outlines the factors affecting the dose in digital radiography and in CT, and identifies and describes strategies used in digital radiography and in CT for dose optimization. This book is intended for all those working in digital radiography and CT environments including radiological technologists, and radiographers, radiologists, biomedical engineering technologists, and student medical physicists. It is best used as a supplement to radiologic science textbooks, and in particular, radiation protection textbooks. Furthermore, this book lays the foundations for students and practitioners engaged in research on dose reduction and dose optimization in radiology. · Provides practical and useful methods for optimization of doses from digital radiography and CT · Describes the International Commission on Radiological Protection (ICRP) principle of optimization · Outlines the factors affecting the dose in digital radiography and in computed tomography

Radiation Protection in Diagnostic X-Ray Imaging covers the recent developments that have been introduced to address the increasing dose to the patient, and new assessment tools for use in dose optimization studies. Based on material from ASRT, ARRT and CAMRT, as well as Current Concepts of Radiation Protection. Content is mapped to the ARRT Radiation Protection Examination Specifications and ASRT Radiation Protection Objectives. In addition to topics prescribed by the ARRT for the certification examination, this book includes topics for advanced study. Some electronic and eBook versions do not include access to Navigate 2 Advantage resources.

Computer-assisted imaging with radiation (x- and gamma rays) is an integral part of modern medical-diagnostic practice. This imaging technology is also slowly finding its way into industrial applications. Although the technology is well developed, there is a need for further improvement to enhance image quality, reduce artifacts, minimize patient radiation exposure, compete with and complement other imaging methods (such as magnetic resonance imaging and ultrasonics), and accommodate dense and large objects encountered in industrial applications. Scientists and engineers, attempting to progress this technology, are faced with an enormous amount of literature, addressing the imaging problem from various view points. This book provides a single source that addresses both the physical and mathematical aspects of the imaging problem in a consistent and comprehensive manner. Discusses the inherent physical and numerical capabilities and limitations of the methods presented for both the forward and inverse problems Provides information on available Internet resources and software Written in a manner that makes it readable by physicists, mathematicians, engineers and computer scientists - avoids, as much as possible, the use of specialized terminology without clear introduction and definition

This title is directed primarily towards health care professionals outside of the United States. The new edition has been fully updated to reflect the latest advances in technology and legislation and the needs of today's radiology trainees. Invaluable reading, particularly for those sitting the primary and final examinations of the Royal College of Radiology, UK, the book will also be of value to radiographers and personnel interested in medical imaging. The concise text is also accompanied by clear line drawings and sample images to illustrate the principles discussed. Closely matches needs of FRCR examination candidates. Updated to reflect changes to FRCR examination. More medically orientated. Covers new legislation concerning radiological safety etc. 'Must-know' summaries at end of each chapter. Completely new design.

A Comprehensive Guide to Radiographic Sciences and Technology is a concise review of radiographic physics and imaging, perfect for students preparing for certification examinations such as the American Registry for Radiologic Technologists (ARRT). Aligned with the core radiographic science components of the current American Society of Radiologic Technologists (ASRT) curriculum, this up-to-date resource covers topics including radiation production and characteristics, imaging equipment, digital image acquisition and display, radiation protection, basic principles of computed tomography, and quality control. The guide begins with an overview of the radiographic sciences and technology, followed by detailed descriptions of the major components of digital radiographic imaging systems. Subsequent sections discuss the essential aspects of diagnostic radiography and computed tomography, including basic physics, imaging modalities, digital image processing, quality control, imaging informatics, and basic concepts of radiobiology and radiation protection. Throughout the book, concise chapters summarise the critical knowledge required for effective and efficient imaging of the patient while emphasising the important, yet commonly misunderstood, relationship between radiation dose and image quality. Written by an internationally recognised expert in the field, this invaluable reference and guide: Provides easy access to basic physics, techniques, equipment, and safety guidelines for radiographic imaging Reflects the educational requirements of the American Society of Radiologic Technologists (ASRT), the Canadian Association of Medical Radiation Technologists (CAMRT), the College of Radiographers (CoR), and other radiography societies and associations worldwide Offers a range of pedagogical tools such as chapter outlines, key term definitions, bulleted lists, practical examples, and links to current references and additional resources Includes charts, diagrams, photographs, and x-ray images A Comprehensive Guide to Radiographic Sciences and Technology is required reading for students in programs using ionizing radiation, those preparing for the ARRT and other global radiography certification exams, and practising technologists wanting to refresh their knowledge.

The purpose of this book is to give the reader a basic Computed Tomography for Radiographers is divided into introduction to computed tomography. It is also directed two sections. Part 1 is dedicated to the technical aspects of towards qualifying radiographers and to all qualified per computed tomography and Part 2 to the clinical aspects. sonnel who are associated with computed tomography. Computed tomography is also known as: Computed tomography is a complex technology, but it has Computed axial tomography (CAT) been my aim to keep the text concise using diagrams and Computed aided tomography (CAT) images wherever possible. A brief review of X-ray tubes and Computed transvt~rse axial tomography (CTAT) general physics has been given, although the mathematics of Computed transmission tomography (CTT) image reconstruction has been omitted. If required, Reconstruction tomography (RT) dedicated works on the above subjects may be referred to by Selective computed assisted tomography (SCAT) the reader. This book concentrates on the application of the Transmission axial tomography (TAT) above to computed tomography.