Adhesive bonding has been used in the manufacture of primary aircraft fuselage and wing structures by various constructors since 1945. By a proper design, adhesive bonding often helps in designing structures mechanically equivalent to or even stronger than conventional assemblies. Adhesive Joining of Structural Components: New Insights and Technologies introduces the reader to some recent progress involved in adhesive joining of structural components. The chapters, seminal SAE International technical papers, cover the most recent advances in adhesive materials, surface preparation and controls, innovative bonding technologies, hybrid bonded/bolted joints, non-destructive testing and failure modelling of adhesively bonded joints. Edited by Dr. Alessandro Pegoretti, Professor of Materials Science and Technology at the University of Trento, Italy, Adhesive Joining of Structural Components: New Insights and Technologies is a must-read resource for those interested in the field of adhesive joining of structural components, which will assume an increasingly important role in designing and manufacturing lightweight structures. In fact, recent advancements in adhesives, methods for surface preparation and control, bonding technologies, non-destructive testing and modelling of failure mechanisms will certainly contribute to revitalize this relatively "mature" assembling technique.

This book introduces the reader to some recent progress involved in adhesive joining of structural components. The chapters, seminal SAE International technical papers, cover the most recent advances in adhesive materials, surface preparation and controls, innovative bonding technologies, hybrid bonded/bolted joints, non-destructive testing and failure modelling of adhesively bonded joints.

Most structures are comprised of a number of individual parts or components which have to be connected to form a system with integral load transmission path. The structural adhesive bonding represents one of the most enabling technologies to fabricate most complex structural configurations involving advanced materials (e.g. composites) for load-bearing applications. Quite recently there has been a lot of activity in harnessing nanotechnology (use of nanomaterials) in ameliorating the existing or devising better performing structural adhesives. The 10 chapters by subject matter experts look at the following issues: Surface preparation for structural adhesive joints (SAJ) Use of nanoparticles in enhancing performance of SAJ Optimization of SAJ Durability aspects of SAJ Debonding of SAJ Fracture mechanics of SAJ Failure analysis of SAJ Damage behavior in functionally graded SAJ Impact, shock and vibration characteristics of composites for SAJ Delamination arrest methods in SAJ

Adhesive bonding is often effective, efficient, and often necessary way to join mechanical structures. This important book reviews the most recent improvements in adhesive bonding and their wide-ranging potential in structural engineering. Part one reviews advances in the most commonly used groups of structural adhesives with chapters covering topics such as epoxy, polyurethane, silicone, cyanoacrylate, and acrylic adhesives. The second set of chapters covers the various types of adherends and pre-treatment methods for a range of structural materials such as metals, composites and plastics. Chapters in Part three analyse methods and techniques with topics on joint design, life prediction, fracture mechanics and testing. The final group of chapters gives useful and practical insights into the problems and solutions of adhesive bonding in a variety of hostile environments such as chemical, wet and extreme temperatures. With its distinguished editor and international team of contributors, Advances in structural adhesive bonding is a standard reference for structural and chemical engineers in industry and the academic sector. Reviews advances in the most commonly used groups of structural adhesives including epoxy, silicone and acrylic adhesives Examines key issues in adhesive selection featuring substrate compatibility and manufacturing demands Documents advances in bonding metals, plastics and composites recognising problems and limitations

This book is open access under a CC BY 4.0 license. It presents the results of the ComBoNDT European project, which aimed at the development of more secure, time- and cost-saving extended non-destructive inspection tools for carbon fiber reinforced plastics, adhered surfaces and bonded joints. The book reports the optimal use of composite materials to allow weight savings, reduction in fuel consumptions, savings during production and higher cost efficiency for ground operations.

Joining of Materials and Structures is the first and only complete and highly readable treatment of the options for joining conventional materials and the structures they comprise in conventional and unconventional ways, and for joining emerging materials and structures in novel ways. Joining by mechanical fasteners, integral designed-or formed-in features, adhesives, welding, brazing, soldering, thermal spraying, and hybrid processes are addressed as processes and technologies, as are issues associated with the joining of metals, ceramics (including cement and concrete) glass, plastics, and composites (including wood), as well as, for the first time anywhere, living tissue. While focused on materials issues, issues related to joint design, production processing, quality assurance, process economics, and joint performance in service are not ignored. The book is written for engineers, from an in-training student to a seasoned practitioner by an engineer who chose to teach after years of practice. By reading and referring to this book, the solutions to joining problems will be within one’s grasp. Key Features: · Unprecedented coverage of all joining options (from lashings to lasers) in 10 chapters · Uniquely complete coverage of all materials, including living tissues, in 6 chapters · Richly illustrated with 76 photographs and 233 illustrations or plots · Practice Questions and Problems for use as a text of for reviewing to aid for comprehension * Coverage all of major joining technologies, including welding, soldering, brazing, adhesive and cement bonding, pressure fusion, riveting, bolting, snap-fits, and more * Organized by both joining techniques and materials types, including metals, non-metals, ceramics and glasses, composites, biomaterials, and living tissue * An ideal reference for design engineers, students, package and product designers, manufacturers, machinists, materials scientists

The intention of this book is that it should contain everything an engineer needs to know to be able to design and produce adhesively bonded joints which are required to carry significant loads. The advan tages and disadvantages of bonding are given, together with a sufficient understanding of the necessary mechanics and chemistry to enable the designer to make a sound engineering judgement in any particular case. The stresses in joints are discussed extensively so that the engineer can get sufficient philosophy or feel for them, or can delve more deeply into the mathematics to obtain quantitative solutions even with elasto plastic behaviour. A critical description is given of standard methods of testing adhesives, both destructively and non-destructively. The essen tial chemistry of adhesives and the importance of surface preparation are described and guidance is given for adhesive selection by me ans of check lists. For many applications, there will not be a unique adhesive which alone is suitable, and factors such as cost, convenience, produc tion considerations or familiarity may be decisive. A list of applications is given as examples. The authors wish to increase the confidence of engineers using adhesive bonding in load-bearing applications by the information and experience presented. With increasing experience of adhesives en gineering, design will become more elegant as weH as more fitted to its products.